FLOORING
For proper installation, you must place this refrigerator on a level, hard surface that is the same height as the rest of the floor. This surface should be strong enough to support a fully loaded refrigerator, or approximately 335lbs (152kg).
To protect the finish of the flooring, cut a large section of the cardboard carton and place it under the refrigerator where you are working. When moving the refrigerator, you need to pull and push it straight forwards or back. Do not wiggle it from side to side.
ACCESSORIES AND
REQUIRED TOOLS
The following accessories are included with your refrigerator:
REMOVING THE
REFRIGERATOR DOORS
For some installations you need to remove the |
|
fridge and freezer drawers so you can move the |
|
refrigerator to its final location. Do not remove |
|
the doors/drawer if you don’t need to. If you do |
|
not need to remove the refrigerator doors, go |
|
to Adjusting the Level on page 9. If you need to | 01 |
remove the doors. continue below. | |
Before removing the door/drawer, make sure you | SETTING |
Disconnect power to the refrigerator before | |
read the following items: |
|
WARNING removing the door or drawer. | UP |
|
tBe careful not to drop, damage or scratch the door/drawer while removing them.
tUse care when you remove the doors/drawer. The doors are heavy and you could injure yourself.
tReattach the doors/drawer properly to avoid:
HOW TO ASSEMBLE THE HANDLE
Fridge door handle assembly
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Hex wrench | Fastener | ||
|
|
|
|
|
Required Tools (Not provided)
You need the following tools to complete the installation of your refrigerator:
Philips | Socket wrench | |
screwdriver(+) | (10mm) | |
Pliers | Allen wrench |
|
(3/16”) (5mm) |
| |
|
|
Check the direction of Handle assembly.
(Assemble the side of the handle attached a sticker toward toward the upper direction.)
setting up _09
2012.3.31 9:49:32 AM