Samsung RF263BEAESR Setting up your French Door Refrigerator, When moving your refrigerator

Setting up your French Door Refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on your purchase of this Samsung French Door Refrigerator.

We hope you enjoy the state-of-art features and

Selecting the best location for the refrigerator

Choose:

tA location with easy access to a water supply.

tA location without direct exposure to sunlight.

tA location with a level floor.

tA location with enough space for the refrigerator doors to open easily.

tA location that allows sufficient space to the right, left, back and top for air circulation.

tA location that allows you to move the refrigerator easily if it needs maintenance or service.

2 inches

33/4inches

2 inches

The following chart details the exact height and depth of this Samsung French Door Refrigerator.

Model	RF263T** / RF263B** / RF263N**
	RF261B**/ RF260B**
Depth “A”	33	27/32” (860mm)
Width “B”	35	25/32” (909mm)
Height “C”	68	3/8” (1737mm)
Overall Height “D”	70” (1778mm)
Depth “E”	36	7/32” (920mm)

tAllow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.

tDo not install the refrigerator where the temperature will go below 50ºF (10ºC).

tDo not locate the refrigerator where it may become wet.

	B
	A
	E
C	D

If the refrigerator does not have enough space, the internal cooling system may not work properly. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When you install the refrigerator next to a fixed wall, you need a minimum clearance of 3 ¾”

(95mm) between the refrigerator and wall to allow the door to swing open.

Important: Make sure that you can easily move

your refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc.

08_ setting up

When moving your refrigerator

To prevent floor damage, be sure the front CAUTION adjusting legs are in the up position (above

the floor). Refer to ‘Adjusting the Level’ in the manual (on page 9).

Flat-blade screw	Control Lever
driver(-)

DA68-02601A(EN+FR+ES)-0.2.indb 6

2012.3.31 9:49:31 AM