Dynaudio SUB 250 manual Controls and connections

Page 8

Before operation

➊

➋

Controls and connections

➊POWER ON/OFF

Main power switch (to switch the subwoofer manually on and off). LED: shows operation mode:

•red = subwoofer switched on and in mute mode

•green = subwoofer is activated

➋AC IN

Mains power input.

➌GAIN

Subwoofer volume level.

➍SUB Lowpass

Subwoofer lowpass frequency: continuously variable from 50 to 150 Hz.

➎PHASE

Phase setting: phase can be set to 0° or 180°.

➏MODE

Subwoofer operation mode LFE or Slave.

➌• LFE: setting if just one subwoofer is used or for first subwoofer if system consists of multiple subwoofers. Note that the SUB Lowpass control does not have an effect when the LFE Mode is selected.

•Slave: setting for second and all following subwoofers. Note that the SUB

➍Lowpass, PHASE and GAIN controls do not have an effect when the Slave Mode is selected.

➐SUB I/O

➎• LFE/Slave in: input for LFE signal from processor/receiver. Note that the signal must be a true LFE signal or already have been filtered by the processor/receiver, as SUB Lowpass does not have an effect in combination

➏with the LFE input.

•LFE/to Slave: output to next subwoofer if installed.

➐➑ SAT/SUB Input

➑

Input for full bandwidth signal from processor/receiver. This signal will be processed according to the SAT Highpass setting and provided at the SAT Output connection for satellite speakers to be connected.

➒SAT Output

Output for satellite speakers to be connected. This signal is processed according

➒to the SAT Highpass setting.

➓SAT Highpass

Allows cutting off low frequencies of the signal provided at the SAT Output.

➓• Flat: signal is not processed

•60: cut-off frequency at 60 Hz

•80: cut-off frequency at 80 Hz

6

Dynaudio SUB 250

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SUB Operating Guide / BedienungsanleitungContents InhaltDynaudio SUB Important Safety Instructions Risk of Electric Shock Do not Open Safety signsSignal words How this operating manual is structured Used signs and symbolsAbout this operating manual Unpacking GrilleControls and connections Damage of Device DUE to Improper Connection Connecting the subwooferSubwoofer inputs Connecting a single subwoofer ➊ Connecting the SAT/SUB input➋ Connecting the LFE channel Connecting multiple subwoofersSwitching the subwoofer on/off Power ON/OFF Connecting loudspeakersAutomatic mode Connecting speakersAdjusting the volume Gain Selecting the subwoofer cut-off frequency SUB LowpassHigh Sound Levels Selecting the cut-off frequencySetting the phase Phase Setting the satellite cut-off frequency SAT HighpassFinding the correct phase setting Setting the cut-off frequencyImpact of room-modes Positioning the subwooferChoose adequate music material Using multiple subwoofers Corner placementPositioning possibilities Next to wall, away from cornerVolume Gain General tipsCut-off frequencies Cross-over frequencies set correctlySubwoofer too low, main speakers too high Subwoofer too high, main speakers too lowSpecific tips Control possibilitiesGeneral tips Damage of Small Satellite Speakers Troubleshooting Check this firstTechnical Specifications Changing the fuseRisk of Fire Changing the fuseWarranty Sehr geehrter Musikliebhaber Bestimmungsgemäßer Gebrauch ServiceSicherheitshinweise Verwendete Zeichen und Symbole Zu dieser AnleitungStoffabdeckung AuspackenZum Aufbau dieser Anleitung Anschluss- und Bedienelemente ➋ AC in NetzanschlussSubwoofer anschließen Subwoofer EingängeEinen einzelnen Subwoofer anschließen Mehrere Subwoofer anschließen➊ SAT/SUB Input anschließen ➋ LFE-Kanal anschließenLautsprecher anschließen Lautsprecher anschließenEin-/Ausschalten Power ON/OFF Lautstärke einstellen GainAutomatischer Modus Schädigung DES Gehörs Durch ZU Hohe SchallpegelGrenzfrequenz einstellen Phase einstellen PhaseSubwoofer-Grenzfrequenz wählen SUB Lowpass Satelliten-Grenzfrequenz anpassen Die richtige Phasen-Einstellung findenSatelliten-Grenzfrequenz anpassen SAT Highpass Einfluss von Raum-Moden Subwoofer aufstellenVerwenden Sie geeignetes Musikmaterial Aufstellungsmöglichkeiten Mehrere Subwoofer verwendenEckaufstellung Wandaufstellung mit Abstand zur RaumeckeGenerelle Tipps Lautstärke GainGrenzfrequenzen Übergangsfrequenzen optimal eingestelltSubwoofer zu niedrig, Lautsprecher zu hoch eingestellt Subwoofer zu hoch, Lautsprecher zu niedrig eingestelltEinstellmöglichkeiten Generelle EinstelltippsSpezielle Einstelltipps Schwache Verstärker und kleine Lautsprecher entlastenBeschädigung DER SATELLITEN-LAUTSPRECHER Fehlersuche Prüfen Sie zuerst folgende PunkteSicherung wechseln Sicherung ersetzenFeuergefahr Durch Falsche Sicherung Technische Daten Parameter DatenGarantie Dynaudio A/S

SUB 250 specifications

The Dynaudio SUB 250 is a powerful and sophisticated subwoofer designed to deliver deep, accurate bass performance for music enthusiasts and home theater aficionados alike. This subwoofer boasts a modern design that seamlessly integrates into any environment while providing high-quality audio reproduction.

At the heart of the SUB 250 is a robust 10-inch bass driver, engineered to deliver a precise and dynamic sound across a wide frequency range. The driver utilizes Dynaudio's proprietary technology to ensure low distortion, resulting in a clean and powerful bass response. This translates into an immersive listening experience, where every note and beat is felt as much as it is heard.

One of the key features of the SUB 250 is its advanced amplifier, capable of delivering up to 250 watts of peak power. This powerful amplification allows the subwoofer to handle demanding audio tracks without compromising performance. The class D amplifier ensures high efficiency and less power consumption, making the SUB 250 not only powerful but also energy-efficient.

The SUB 250 incorporates several intelligent technologies to enhance performance and usability. One such feature is the adjustable crossover frequency, which allows users to seamlessly integrate the subwoofer with their existing speaker systems. This flexibility is crucial for achieving the perfect balance between the subwoofer and the main speakers, ensuring optimal sound reproduction across the entire audio spectrum.

Additionally, the SUB 250 is equipped with multiple connection options, including RCA and speaker-level inputs, making it compatible with various audio systems. This versatility ensures that users can easily incorporate the subwoofer into their home entertainment setups, whether they are utilizing a stereo system or a full surround sound configuration.

The design of the SUB 250 is another highlight, featuring a sleek cabinet that minimizes resonance and vibration. The enclosure is constructed to support the driver effectively, allowing for extended low-frequency output without compromising sound quality. The subwoofer is available in a variety of finishes, allowing it to blend seamlessly with any décor.

In summary, the Dynaudio SUB 250 is an elite subwoofer that excels in delivering deep, accurate bass while offering advanced features and technologies for flexibility and ease of use. Its combination of powerful performance, intelligent design, and versatility makes it an excellent choice for anyone looking to enhance their audio experience.
Top Page Image Contents