EAW CXA160 / CXA80 instruction manual Eq-Low, Eq-High, Volume, Status Leds, Power

Page 4

3. FRONT PANEL FEATURES

1. EQ-LOW

Turn this clockwise to boost the level of the low-frequency range below 100 Hz. Turn it counter-clockwise to cut the level. In the detented center position, there is no change in level. The maximum boost and cut is 12 dB.

2. EQ-HIGH

Turn this clockwise to boost the level of the high-frequency range above 10 kHz. Turn it counter-clockwise to cut the level. In the detented center position, there is no change in level. The maximum boost and cut is 12 dB.

3. VOLUME

Use this volume control to adjust the sound output level to your speakers.

4. STATUS LEDS

These LEDs show:

OVERLOAD (RED)

SIGNAL PRESENT (AMBER)

FAULT (RED)

POWER ON (GREEN)

5. POWER

Use this switch to turn the unit on or off. The power is on when the top of the switch is pressed, and off when the bottom is pressed. Turn it off if you are not using the unit for long periods of time.

1

2

3

4

5

– CXA160 / CXA80

Image 4
Contents CXA160 / CXA80 Safety Instructions Table of ContentsIntroduction FeaturesApplications Volume PowerEQ-LOW EQ-HIGHRear Panel Features Input ConnectorsInput DIP switch Gain pot and OL overload LEDPriority DIP switch Priority ConnectorsPriority Terminals Parallel Output Connectors External Volume ControlFault Relay Low Cut FilterLOW Impedance Output ConnectorsHigh Impedance AC Power DC PowerConnections Rack MountingTypical Hookup Diagram 24VDCSpecifications Audio Input and Proximity inputBlock Diagram InputService Information EAW Commercial Warranty EAW Commercial a Loud Technologies Inc. Company