8. SPECIFICATIONS
Audio Input and Proximity input
Input Type | Balanced Differential, Unbalanced |
Input Impedance | 30 kΩ (Bal, |
| 2.7 kΩ (Bal, |
Input Gain Trim Range: | |
| |
Maximum Input Level: | +19 dBV |
Nominal Input Level: | 0 dBV |
Dynamic Range | 105 dB |
Phantom Power | 24 V |
Frequency Response: | 20 Hz - 20 kHz, + 1 dB |
Total Harmonic Distortion | > 0.1% 20 Hz - 20 kHz @ 0 dBV |
EQ | Butterworth, ±12 dB fixed at 100 Hz |
| ±12 dB fixed at 10 kHz |
Power Amplifier
CXA80 Output Power at 1% THD @ 1 kHz: 80 W @ 100 V 80 W @ 70 V 80 W @ 25 V 80 W @ 4 Ω
CXA160 Output Power at 1% THD @ 1 kHz: 160 W @ 100V 160 W @ 70V 160 W @ 25 V 160 W @ 4 Ω
Total Harmonic Distortion: | < 0.15% |
| (100 V, 70 V, 25 V & 4 Ω modes) |
Power Bandwidth (at | |
| 40 Hz - 15 kHz (+0 dB |
Signal to Noise ratio: | 95 dBV |
Protection: | Heatsink Overtemp, DC offset, Short Circuit |
AC Line Input Power
~100 VAC to 240 VAC 50/60Hz 200W
AC Input Low Voltage Detector threshold
| 70% of Nominal Line |
Physical Specifications | |
Height (Excluding Feet): | 3.46 in/88 mm |
Width (Overall): | 19.00 in/483 mm |
Depth (Rear side of Rack ear to Rear panel, excluding connectors):
CXA80 Weight: | 15.00 in/381 mm |
| |
Net | 17.7 lb/7.9 kg |
Shipping | 22.8 lb/10.2 kg |
CXA160 Weight: |
|
Net | 19.7 lb/8.8 kg |
Shipping | 24.9 lb/11.1 kg |
Operating Temperature Range
DISCLAIMER
EAW Commercial continually engages in research related to product improvement, new materials, and production methods. Design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current EAW Commercial product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.
“EAW Commercial” is a trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged.
12 – CXA160 / CXA80