Automatic Mode for On/Standby

SETTING UP & TUNING IN

Adjusting the settings and using the subwoofer Once you have ensured yourself that all necessary connections have been made, the subwoofer can be switched on and used. With the exception of the mains power switch (No. 2 in fig. 2) controlling the subwoofer is done through the DSC 1 remote control; the numbering at the beginning of each section corresponds to the numbering in fig. 6.

Fig. 6

1.Subwoofer manual On/Off

2.Subwoofer Volume level

3.Subwoofer Roll-off frequency setting

4.LF Extension On/Off

5.Subwoofer Phase selection

6.Configuration presets

Switching the subwoofer On and Off

The Power Switch on the subwoofers back panel switches the subwoofer completely off: Set to the Off position, the subwoofer will not respond to commands from the remote control. For normal operation, the switch will always be set to the On position.

•Switch the subwoofer on with the Power switch on the back panel.

•The Status LED (No. 2 in fig. 7) on the front of the subwoofer will light up green.

The subwoofer switches to On or Standby automatically: Automatic switching works by signal-sensing. As long as a music signal is available on the subwoofers Input, it will remain switched on. After 20 minutes of not sensing any Input music signal or receiving a signal from the remote control, the subwoofer will automatically switch to Standby mode.

When in Standby mode, the Power status LED (No. 2 in fig.

7)is red; when switched to On, the LED is green. During the minute prior to switching to Standby, the Status LED (No. 2 in fig. 7) will alternate slowly between green and red to indicate it is about to switch to Standby.

Even in automatic mode, it is possible to switch the subwoofer to Standby or On, using the on/standby buttons (buttons in No. 2 in fig. 6):

•By pressing the upper button briefly, the subwoofer will switch On (if it was already on, nothing will happen). Note that if no music signal presents itself within 20 minutes, the subwoofer will switch back to Standby again.

•By pressing the lower button briefly, the subwoofer will switch to Standby (if it was already in Standby, nothing will happen). Note that on the next occasion a music signal presents itself (after a 20 minute silence), the subwoofer will switch to On again automatically.

The Power status LED (No. 2 in fig. 7) will show if the subwoofer is in Standby mode (LED is Red) or On (LED is green).

BM 10S, BM12S specifications

Dynaudio is a well-respected name in the world of audio monitoring, known for producing high-quality studio speakers that deliver exceptional performance. Two notable products in their lineup are the BM 10S and BM 12S subwoofers, designed to complement their BM series studio monitors. These subwoofers provide an impactful low-frequency foundation for music producers, sound engineers, and audiophiles alike.

The Dynaudio BM 10S features a 10-inch woofer, while the BM 12S boasts a larger 12-inch driver. Both models utilize Dynaudio's proprietary driver technologies, ensuring that low-end reproduction is both precise and articulate. The robust construction of these subwoofers is complemented by high-grade materials that enhance durability and performance, ensuring reliability even in demanding studio environments.

One of the standout features of the BM 10S and BM 12S is their integrated amplification. The BM 10S is powered by a 150-watt amplifier, while the BM 12S ramps up the power to 200 watts. This built-in amplification allows for efficient power management and provides ample headroom for dynamic audio playback. Both models exhibit a frequency response that extends down to 29 Hz, enabling users to hear vital low-end details in their mixes, which is crucial for genres like electronic music, hip-hop, and film soundtracks.

The BM series subwoofers also come with low-frequency shelf filters, allowing users to tailor the bass response to fit the acoustics of their studio room. This is a critical feature for achieving an accurate monitoring environment and minimizing acoustic issues such as standing waves or room modes. Moreover, the subwoofers offer flexible connectivity options, making it easy to integrate them into existing setups, whether for professional studio work or home audio applications.

In summary, the Dynaudio BM 10S and BM 12S subwoofers represent a perfect blend of advanced technology, robust construction, and user-centric features. With their powerful amplification, precise bass response, and adjustable settings, these subwoofers effectively enhance the monitoring experience, enabling sound professionals to produce music with confidence and clarity. Whether one is mixing tracks or enjoying high-fidelity sound, the BM 10S and BM 12S deliver exceptional performance that meets the high standards of discerning audio professionals.