•Use the same procedure for setting the time for ALARM 2
ACTIVATING OR DEACTIVATING THE ALARMS
• At any time press | SET or | SET to activate or deactivate |
applicable alarm |
|
|
•When ALARM 1 and ALARM 2 are disabled, an applicable icon 
or 
disappears from the unit’s display.
SNOOZE
When the alarm sounds, press the SNOOZE/LIGHT button to temporarily stop the alarm. After the SNOOZE/LIGHT is pressed, the display will illuminate and the alarm will temporarily silence and then resume five minutes later. If the alarm is not disabled after that, it will continue to sound for four additional minutes and then stop automatically.
MOON PHASE
Eight phases of the moon are displayed and automatically updated based on the calendar date.
PRECAUTIONS
This product is engineered to give you years of satisfactory service if handled carefully. Here are a few precautions:
•Do not immerse the unit in water.
•Do not clean the unit with abrasive or corrosive materials.
•Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts.
•Do not tamper with the unit’s internal components. Doing so will
15
invalidate the warranty and may cause damage.
•Use only fresh batteries. Do not mix new and old batteries.
•Read the user's manual thoroughly before operating the unit.
TROUBLESHOOTING
Check here before contacting customer service.
Issue | Symptom | Solution |
Clock | US Atomic Time | Place unit by the window and |
| signal is not | keep it there at least |
| received | overnight |
Clock | Blank display | Check/insert batteries |
| Does not project | Connect the clock to the wall |
| continuously | power outlet using AC/DC |
|
| adapter provided, |
|
| Slide the “CONTINUE |
|
| PROJECTION” switch in the |
|
| direction of the arrow shown |
|
| on the unit. |
16