Windows Setup Guide for | 11 |
3.Setup on Windows NT 4.0
1)Setting up BIOS
By pressing the F2 key on the keyboard when the machine starts up, the BIOS Setup Menu is selected. Select the following item for BIOS setup.
2)Installing Windows
Connect the PS/2 mouse and install Windows NT 4.0.
IMPORTANT:
*When Windows NT is installed without connecting the PS/2 mouse, the touch panel driver cannot be installed. Be sure to connect the PS/2 mouse before installing Windows NT.
3)Installing the Service Pack (SP)
Some drivers require a new version service pack. Install the required service pack.
4)Installing the 810E2 Chipset Software
w Installing the Intel 810/815 Chipset Family Graphics Driver To enable the CRT display, this driver must be installed.
Execute Chipset¥Graphics¥Win9x¥Graphics¥Setup.exe contained in the driver kit, and install “Intel 810/815 Chipset Family Graphics Driver.”
wInstalling the Intel® PRO/100 VE Network Connection Driver
Execute Chipset¥LAN¥100pdisk.exe contained in the driver kit and extract the files onto the hard disk. Select [Network] on the Control Panel and execute “Network Setup Wizard.”