Windows Setup Guide for | 20 |
IMPORTANT:
*On Windows 2000, the
To perform the dual display, after installing the SM712 VGA board (SMI) driver, the TFT and the CRT monitors should be set as primary and secondary monitors, respectively.
To set the TFT monitor as primary monitor, select [Display] on the Control Panel to display the “Display Properties” screen. On this screen, select [Settings] – [Display]. Select “Silicon Motion LynxEM+.” Check the “Use this device as the primary monitor” checkbox at the lower left, then click on the “Apply” button. The TFT monitor is set as primary monitor.
To use only the TFT monitor, set the TFT monitor as primary monitor, then disable the