Refrigeration System

Filter-Drier Installation

Any time the sealed system is opened and the refrigerant charge is removed, the liquid line filter-drier must be replaced and the system thoroughly evacuated before replacing refrigerant.

DO NOT unbraze old filter-drier from system. This will vaporize and drive moisture from desiccant back into system. The old filter-drier should be cut out of system.

The following instructions are generalized to help the technician understand the procedures of sealed system repairs. See Section 5 Component Teardown on the exact steps of accessing the components of the refrigeration system.

1.Disconnect electrical supply to freezer.

2.Recover refrigerant by using EPA approved recovery system.

3.Using a 3 cornered file, score a groove around capillary tube as close to old filter-drier as possible. Break capillary tube along score mark from filter-drier.

4.Cut condenser outlet tube at filter-drier. Discard filter-drier.

5.Thoroughly clean condenser outlet tube and capillary tube.

6.Place inlet connection of filter-drier over condenser tube approximately ¼” and solder.

7.Insert capillary tube input end into filter-drier outlet. Do not allow tube to bottom against screen. Solder carefully so that solder does not plug capillary tube.

8.Install process tube adapter to filter-drier.

9.Evacuate and charge system using the recommended procedure described under Evacuating and Recharging.

10.Reassemble unit.

Evaporator and Suction Line Replacement

The following instructions are generalized to help the technician understand the procedures of sealed system repairs. See Section 5 Component Teardown on the exact steps of accessing the components of the refrigeration system.

1.Disconnect electrical supply to refrigerator.

2.Recover refrigerant by using EPA approved recovery system.

3.Remove shelving.

4.Remove evaporator cover.

5.Remove evaporator from its installation position.

6.Cut or remove suction line from compressor.

7.Cut filter-drier from condensing unit.

8.Remove sealant from cabinet where suction line enters.

9.Remove evaporator and suction line as one piece.

10.Install new evaporator with attached suction line.

11.Seal cabinet.

12.Install new filter drier at condenser outlet.

13.Evacuate and charge system using the recommended procedure described under Evacuating and Recharging.

3-8

Page 22
Image 22
Electrolux FKCH17F7HW service manual Filter-Drier Installation, Evaporator and Suction Line Replacement

FKCH17F7HW specifications

The Electrolux FKCH17F7HW is a standout refrigerator designed to meet the needs of modern households. With its sleek design and advanced features, it not only enhances the kitchen aesthetic but also promotes efficient food storage and preservation.

One of the key features of the FKCH17F7HW is its spacious interior. The refrigerator offers a generous capacity, making it ideal for families or individuals who like to stock up on groceries. Its flexible shelving system allows users to adjust the heights of shelves, accommodating very tall items and optimizing storage space.

The FKCH17F7HW comes equipped with advanced cooling technologies that ensure consistent temperature control. The Frost Free technology prevents the buildup of ice, saving users from the hassle of manual defrosting. This feature also allows for more efficient cooling, which in turn reduces energy consumption. The dynamic cooling system circulates air evenly throughout the refrigerator, helping to maintain an ideal temperature for perishable foods.

Another noteworthy characteristic is the humidity-controlled crisper drawers. These drawers provide an optimal environment for fruits and vegetables, keeping them fresher for longer. By regulating humidity levels, the crisper drawers also help to prevent spoilage, which not only saves money but contributes to less food waste.

In addition to storage practicality, the FKCH17F7HW incorporates energy-efficient technologies. The appliance is designed with an A+ energy rating, which means it operates with lower energy consumption without sacrificing performance. This eco-friendly feature not only benefits the environment but also reduces electricity bills.

The refrigerator also boasts user-friendly controls. Its intuitive electronic control panel makes it easy to adjust settings and ensure optimal performance. Moreover, the LED lighting illuminates the interior, making it easy to find what you need, even in low light conditions.

In summary, the Electrolux FKCH17F7HW is a remarkable refrigerator that combines style, functionality, and energy efficiency. With its generous capacity, advanced cooling technologies, and user-friendly features, it stands as a reliable appliance for any kitchen. Whether you're looking to preserve fresh produce or store family meals, this refrigerator meets a wide range of storage needs while maintaining an attractive design.