Refrigeration System

10.Reform both suction and discharge lines to align with new compressor. If they are too short, use additional lengths of tubing. Joints should overlap 0.5” to provide sufficient area for good solder joint. Clean and mark area where tubing should be cut. Cut tubing with tubing cutter. Work as quickly as possible to avoid letting moisture and air into the system.

11.Solder all connections according to soldering procedure.

12.Remove original filter-drier.

DO NOT unbraze old filter-drier from system. This will vaporize and drive moisture from desiccant back into system. The old filter-drier should be cut out of system.

13.Install new filter-drier at condenser outlet.

14.Evacuate and charge system using recommended procedure described under Evacuating and Recharging.

15.Reconnect compressor terminal leads in accordance with refrigerator wiring diagram.

16.Reassemble unit.

Condenser Replacement

The following instructions are generalized to help the technician understand the procedures of sealed system repairs. See Section 5 Component Teardown on the exact steps of accessing the components of the refrigeration system.

1.Disconnect electrical supply to refrigerator.

2.Remove compressor access panel.

3.Recover refrigerant by using EPA approved recovery system.

4.Remove condenser fan mounting screws.

5.Unplug fan motor harness located in back of fan motor.

6.Remove fan motor and fan blade.

7.After refrigerant is completely recovered, disconnect inlet and discharge lines from condenser.

8.Lift front of condenser and pull out of retainers mounted to the drain pan.

9.Remove old condenser out the back of cabinet.

10.Install replacement condenser.

11.Remove original filter-drier.

DO NOT unbraze old filter-drier from system. This will vaporize and drive moisture from desiccant back into system. The old filter-drier should be cut out of system.

12.Install new filter-drier at condenser outlet.

13.Evacuate and charge the system using recommended procedure described under Evacuating and Recharging.

14.Reassemble unit.

3-7

Page 21
Image 21
Electrolux FKCH17F7HW service manual Condenser Replacement

FKCH17F7HW specifications

The Electrolux FKCH17F7HW is a standout refrigerator designed to meet the needs of modern households. With its sleek design and advanced features, it not only enhances the kitchen aesthetic but also promotes efficient food storage and preservation.

One of the key features of the FKCH17F7HW is its spacious interior. The refrigerator offers a generous capacity, making it ideal for families or individuals who like to stock up on groceries. Its flexible shelving system allows users to adjust the heights of shelves, accommodating very tall items and optimizing storage space.

The FKCH17F7HW comes equipped with advanced cooling technologies that ensure consistent temperature control. The Frost Free technology prevents the buildup of ice, saving users from the hassle of manual defrosting. This feature also allows for more efficient cooling, which in turn reduces energy consumption. The dynamic cooling system circulates air evenly throughout the refrigerator, helping to maintain an ideal temperature for perishable foods.

Another noteworthy characteristic is the humidity-controlled crisper drawers. These drawers provide an optimal environment for fruits and vegetables, keeping them fresher for longer. By regulating humidity levels, the crisper drawers also help to prevent spoilage, which not only saves money but contributes to less food waste.

In addition to storage practicality, the FKCH17F7HW incorporates energy-efficient technologies. The appliance is designed with an A+ energy rating, which means it operates with lower energy consumption without sacrificing performance. This eco-friendly feature not only benefits the environment but also reduces electricity bills.

The refrigerator also boasts user-friendly controls. Its intuitive electronic control panel makes it easy to adjust settings and ensure optimal performance. Moreover, the LED lighting illuminates the interior, making it easy to find what you need, even in low light conditions.

In summary, the Electrolux FKCH17F7HW is a remarkable refrigerator that combines style, functionality, and energy efficiency. With its generous capacity, advanced cooling technologies, and user-friendly features, it stands as a reliable appliance for any kitchen. Whether you're looking to preserve fresh produce or store family meals, this refrigerator meets a wide range of storage needs while maintaining an attractive design.