Component Teardown
Condenser Service
The condenser is foamed in place and is not accessible for repair. However, repair can be made by installing a service replacement condenser kit. Refer to the part list of the model being serviced for the correct kit part number.
Each service replacement condenser kit consists of a condenser assembly that can be installed on the back of the cabinet, mounting hardware, replacement
To install, use the following procedure:
1.Disconnect unit from source of power.
2.Recover refrigerant by using EPA approved recovery system.
3.Installed the replacement condenser in accordance with the instructions included with the kit.
4.Evacuate and charge a system using the recommended procedure described under evacuation and recharging found in section 4.
