FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite
1800 Series
MODEM REMOVAL
M2x4 brass screws
RJ11 Jack
Modem slot cover | M2.5x4 black flat head screw | Modem |
1.Remove one M2.5x4 black flat head screw securing the modem slot cover.
2.Insert the case separator into the notched side of the cover and lift up to release the two latches securing the left side of the modem slot cover.
3.Remove the glass tape securing the
4.Remove two M2x4 brass screws securing the modem board.
5.Lift up the modem board to disconnect it from the system board.
6.Remove the
KEYBOARD REMOVAL
Latch
Keyboard holder
1.Open the display panel.
2.Remove the Keyboard holder at the top of the keyboard.
M2.5x2.6 black screws
3.Remove two M2.5x2.6 black screws securing the keyboard.
TOSHIBA
Tough Enough for Today’s World