Toshiba 1800 manual Cooling Module Removal CPU Removal, CD-ROM/DVD ROM Drive Removal

FIELD REPLACEABLE UNIT DOCUMENTATION

TM

Satellite

1800 Series

COOLING MODULE REMOVAL CPU REMOVAL

	Flat head
	screwdriver
	Cooling
	module
	Fan cable
	CPU
	PJ770
	lock
	CPU
M2x16 brass screws	Silicone grease

3.Remove four M2x16 brass screws securing the cooling module.

4.Disconnect the fan cable from PJ770 from the system board and lift out the Fan module.

5.Slide the CPU lock in the direction of the arrow.

6.Insert a 5mm flat head screwdriver on the top side of the CPU socket and push the socket in the direction of the arrow and lift out the CPU.

NOTE: When installing the CPU make sure that a silicone grease is applied before attaching the cooling module. Please refer to FSB-200112 for the complete procedures on how to apply the silicone grease.

CD-ROM/DVD ROM DRIVE REMOVAL

M2x5.5 silver screws

CD/DVD-ROM	Brass washers
drive
CD/DVD-ROM drive
bracket	M2x2 silver screws

.

1.	Remove two M2x5.5 silver screws securing the CD-ROM/	3. Remove two M2x2 silver screws and two brass
	DVD ROM drive.	washers securing the CD/DVD- ROM drive bracket.
2.	Slide the CD/DVD-ROM drive to the right to disconnect
	it from PJ321 on the system board.

TOSHIBA

Tough Enough for Today’s World