Blade ICE G8124-E manual Enable the route map, Turn BGP on, Exit Router BGP mode

BLADEOS 6.5.2 Application Guide

4.Set up the BGP attributes.

If you want to overwrite the attributes that the peer router is sending, then define the following BGP attributes:

￿Specify the AS numbers that you want to prepend to a matched route and the local preference for the matched route.

￿Specify the metric [Multi Exit Discriminator (MED)] for the matched route.

RS G8124(config-route-map)# as-path-preference<AS number>

RS G8124(config-route-map)# local-preference<local preference number>

RS G8124(config-route-map)# metric <metric value>

5.Enable the route map.

RS G8124(config-route-map)# enable

RS G8124(config-route-map)# exit

6.Turn BGP on.

RS G8124(config)# router bgp

RS G8124(config-router-bgp)# enable

7.Assign the route map to a peer router.

Select the peer router and then add the route map to the incoming route map list,

RS G8124(config-router-bgp)# neighbor 1 route-map in <1-32> or to the outgoing route map list.

RS G8124(config-router-bgp)# neighbor 1 route-map out <1-32>

8.Exit Router BGP mode.

RS G8124(config-router-bgp)# exit

264 ￿ Chapter 19: Border Gateway Protocol BMD00220, October 2010