Compaq dc7800 manual Technical Specifications Communications

Power requirement

ACBS

Boot ROM support Network transfer mode

Network transfer rate

Environmental

Management capabilities

Alerting

QuickSpecs

HP Compaq dc7800 Business PC

Technical Specifications - Communications

Integrated Intel

82566DM Gigabit

Network Connection

Connector	RJ-45
Controller	Intel Nineveh Gigabit platform LAN Connect Networking Controller
Memory	Integrated 96KbB on chip buffer memory
Data rates supported	10/100/1000 Mbps
Compliance	IEEE 802.1P, 802.1Q, 802.2, 802.3, 802.3 ab and 802.3u compliant,
Bus architecture	GLCI, LCI interface. Intel specific MAC to PHY interface
Data transfer mode	At gigabit GLCI (802.3 serdes) is for Data, LCI (parallel bus)for MDIO,
	at 10/100 LCI for both data and MDIO, GLCI is idle.

Hardware certifications FCC, B, CE, TUV- cTUVus Mark Canada and United States, TUV- GS Mark for European Union

Require 3.3Vaux,1.8V and 1.0V or just 3.3V with integrated regulators

Power consumption 1.16 Watts for 82566, whole LOM 2.53 Watts

Intel Auto Connect Battery Saving feature

Yes

Full-duplex

Half-duplex (not available for the 1000BASE-T transceiver) 10BASE-T (half-duplex) 10 Mbps

10BASE-T (full-duplex) 20 Mbps 100BASE-TX (half-duplex) 100 Mbps 100BASE-TX (full-duplex) 200 Mbps 1000BASE-T (full-duplex) 2000 Mbps Operating temperature 32° to 131°F (0° to 55° C)

	To 70° C for external regulator
Operating humidity	85% at 131° F (55° C)

WOL, auto MDI crossover, PXE, Muti-port teaming, RSS, Advanced cable diagnostic.

ASF 2.0 support, AMT 3.0 support

Intel PRO/1000 PT PCIe Connector		RJ-45
Gigabit NIC	Controller	Intel 82572EI Gigabit Ethernet Controller
	Memory	Integrated Dual 48K configurable transmit receive FIFO Buffers
	Data rates supported	10/100/1000 Mbps
	Compliance	IEEE 802.1P, 802,1Q, 802.2, 802.3, 802.3AB and 802.3u compliant,
		802.3x flow control
	Bus architecture	PCI-E 1.0a
	Data transfer mode	Bus-master DMA

Hardware certifications FCC, B, CE, TUV- cTUVus Mark Canada and United States, TUV- GS

	Mark for European Union
Power requirement	Aux 3.3V, 3.0 Watts in 1000base-T and 2.0 Watts in 100Base-T
Boot ROM support	Yes
Network transfer rate	10BASE-T (half-duplex) 10 Mbps
	10BASE-T (full-duplex) 20 Mbps
	100BASE-TX (half-duplex) 100 Mbps
	100BASE-TX (full-duplex) 200 Mbps
	1000BASE-T (full-duplex) 2000 Mbps (actual rate limited by PCI Bus)
Environmental	Operating temperature	32° to 131°F (0° to 55° C)
	Operating humidity	85% at 131° F (55° C)

DA - 12744 Worldwide QuickSpecs — Version 13 — 12.14.2007 Page 24