Safety Information
Electrical safety
!To prevent electrical shock hazard, disconnect the power cable from the electri- cal outlet before relocating the system.
!When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
!Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
!Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
!Make sure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
!If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Operation safety
!Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.
!Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
!To avoid short circuits, keep paper clips, screws, and staples away from connec- tors, slots, sockets and circuitry.
!Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.
!Place the product on a stable surface.
!If you encounter technical problems with the product, contact a qualified service technician or your retailer.
Caution! The symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
Part No. 2006025600 | Edition 1 |
Printed in China | June 2008 |
ii |