EAW KF930 specifications Dimensional Drawing, Input Plate, Specifications

DIMENSIONAL DRAWING

KF930	CENTER OF BALANCE
	ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED

30.00

46.00

42.00

7.0023.00

9.13

4.50

FRONTBACK

8.75 18.75

8.56 A

27.75				22.00
		40.00
			10.81
510519 (1)	30°	A	6.44	RIGHT SIDE (VIEW A-A)
	TOP
EXP 8/27/97 SHB

Manufacturing tolerances are +/-0.13 and +/-1°

INPUT PLATE

KF930

S/N

AP6-22 (M)			AP6-21 (F)
1	5		5	1
6				6
2	4		4	2
3				3
C A N N O N			C A N N O N
PIN 1 ... UPPER	LF --	PIN 3 ... LOWER	LF --	PIN 5 ... NC
PIN 2 ... UPPER LF+		PIN 4 ... LOWER	LF+	PIN 6 ... NC

SPECIFICATIONS KF930

A & E SPECIFICATIONS

The dedicated low frequency module shall incorporate 4x 15- in LF transducers. The LF drivers shall be reverse mounted in horizontal pairs to optimize LF driver coupling. The module’s horizontal and vertical beam profiles shall be adjustable via complex digital signal processing. The module shall be inte- grated with complementary frequency-specific modules into a single acoustical unit via complex digital signal processing.

The module shall be equipped with a switch to control an internal passive filter network providing processing appropri- ate to the modules use in an inner or outer array column.

Module frequency response shall vary no more than ±3 dB from 38 Hz to 350 Hz measured on axis. The module shall pro- duce a Sound Pressure Level (SPL) of 101 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 140 dB SPL on axis at 1 meter. Each driver pair shall handle 2000 Watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of 1/2-in thickness void-free cross-grain- laminated Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in black catalyzed polyurethane. Input connectors shall be one each male and female AP6. The enclosure shall include sixteen 3/8”-16 threaded mounting/suspension points (4 each top, bottom and sides). The front of the loudspeaker shall be covered with a vinyl coated perforated steel grille backed with open cell foam to protect against dust.

The dedicated low frequency module shall be the EAW model KF930.

One Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw. com	www. eaw. com
EAW products are continually improved. All specifications are therefore subject to change without notice.			KF930/888060(A)/2 pp	1/29/99	Printed in USA