American Dryer Corp 8.4 Rev 2.2, Phase 8.3 specs

Important

! Read all instructions before operating!

General User Information

Coin/Debit Models “Coin Dry Mode” ___

Cold Start (Initial/First Use)

Appliance is programmed at the factory as follows: Dryer

10 minute dry time/quarter (coin 1) $.25 dry price

Warm Start (After Power Failure)

A few seconds after power is restored, if a cycle was in progress at the time of the power failure, the display will prompt “Select Cycle to Restart”. This is to indicate the need for a setting to be pressed to restart dryer.

Pricing

After the door is opened following the completion of a cycle, the display indicates the cycle price (unless set for free operation). As coins or debit inputs arrive, the display will change to lead the user through the initiation of a cycle.

There are 2 types of pricing:

Accumulative Time

In this Vending Mode each coin inserted has a specific value in time, which is determined by the “Time for Amount to Start”.

Accumulative Coin

In this Vending Mode additional time can only be achieved when the “Time for Top Off” has been inserted.

Note

!A maximum of 99 minutes may be purchased; no additional credit is given when 99 minutes is in the

display.

“Free Dry Mode”

When the Dry Mode is set to FREE, only one cycle time is initially vended. Pressing and holding the HIGH or LOW key for 3-seconds will allow the time to be adjusted. Pressing HIGH will increase the time in 1 minute units and pressing LOW will decrease the time in 1 minute units. Once the desired time is chosen, pressing MED will save the new time.

Hot Keys

Display Reason S.A.F.E. is Disabled

While machine is idle displaying “S.A.F.E. DISABLED … READY INSERT 25¢ TO START” or “S.A.F.E. DISABLED … SELECT A CYCLE”, press the PAUSE and LO keys simultaneously.

Clear Credit

While machine is idle displaying “SELECT A CYCLE” press and hold PAUSE, while holding PAUSE press HI, HI, HI, LO, LO, MED within 3-seconds and the control will display “CLEAR CREDIT?” While still holding PAUSE press any key to clear credit. Releasing PAUSE then pressing any key will not clear credit.

Display Fault Message

While machine is displaying “OUT OF ORDER” press the LO key.

Display Credit Remaining

While machine is displaying “OUT OF ORDER” press the HI key.

Clear “Out of Order”

While machine is displaying “OUT OF ORDER” press and hold the PAUSE key for 3-seconds.

General User Information Non-Coin Models “OPL Dry Mode” ____

Cold Start (Initial/First Use)

This appliance has 20 preset cycles, which are ready for use. To start the unit, use the UP and DOWN ARROW keys to scroll through the preset cycles, until the desired cycle is highlighted, then press the START/ENTER key. You can find a detailed description of the preset cycles in the chart on page 8. While a cycle is running you can press the STOP button once to pause the cycle or twice to clear it completely.

Hot Keys

Display Reason S.A.F.E. is Disabled

While machine is idle displaying “SELECT A CYCLE” or “S.A.F.E. DISABLED … SELECT A CYCLE”, press the STOP and START keys simultaneously.

Clear Current Drying Cycle

While machine is idle displaying “CYCLE PAUSED RESTART CYCLE OR PRESS PAUSE TO CLEAR”, press the STOP key and the cycle will be terminated.

Clear Fault Message

While machine is displaying any fault message press and hold the STOP key for 3-seconds.

113604 - 4

www.amdry.com

Phase 8.3, 8.4 Rev 2.2 specifications

American Dryer Corporation (ADC) has long been a significant player in the commercial laundry equipment industry, and the ADC 8.4 Rev 2.2, Phase 8.3 model exemplifies their dedication to innovation and efficiency. Designed with the needs of modern laundromats and commercial laundry facilities in mind, this dryer offers robust features and advanced technologies that set it apart from its competitors.

One of the main features of the ADC 8.4 Rev 2.2 is its high-capacity drying capabilities. With large drum sizes and powerful airflow systems, it can handle substantial loads, making it ideal for high-traffic environments. This capacity reduces drying times significantly, allowing businesses to increase their throughput and improve customer satisfaction.

The dryer is equipped with advanced digital controls that provide users with intuitive programming options. This feature enables operators to customize drying cycles based on the specific needs of different fabrics, enhancing garment care while optimizing energy efficiency. The control system also provides diagnostic tools that aid in maintenance, allowing technicians to quickly identify and resolve any issues.

Energy efficiency is another hallmark of the ADC 8.4 Rev 2.2. The unit incorporates innovative technologies that reduce energy consumption, such as modulating gas valves and optimized airflow designs. These features not only support environmental sustainability but also help operators decrease operational costs in the long run.

In terms of durability, the ADC 8.4 Rev 2.2 is built with high-quality materials designed to withstand the rigors of daily use. Its structural integrity ensures a long service life, minimizing the need for frequent repairs or replacements. Additionally, the dryer features easy access for maintenance, allowing operators to keep it in peak condition with minimal downtime.

Safety features are incorporated throughout the design, with a focus on protecting both users and the equipment. Features like automatic shut-off, lint filtration systems, and temperature controls work together to ensure a safe and efficient drying process.

In summary, the American Dryer Corporation 8.4 Rev 2.2, Phase 8.3, is a powerful and efficient solution for commercial laundry needs. Its impressive capacity, user-friendly controls, energy-saving technologies, durable construction, and safety features make it an excellent investment for any laundry operation looking to enhance productivity and service quality. With ADC’s legacy of reliability and performance, this model stands as a testament to their commitment to innovation in the laundry industry.