JVC TH-A25 manual Using Preset Tuning, Press ¢or 4to select a preset number, band

Using Preset Tuning

Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 30 FM and 15 AM stations.

To store the preset stations

From the remote control ONLY:

1Tune in the station you want to preset (see “Tuning in Stations”).

ST TUNED

L R

SW

MHz

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

2 Press MEMORY.	MEMORY
The preset number appears on the display and the
PRGM (program) indicator flashes.
PRGM	ST TUNED
L R
SW
	MHz
Preset number

3 Press ¢or 4to select a preset number.

•Press and hold ¢or 4to change the preset number continuously.

4Press MEMORY to store the preset station. MEMORY

The PRGM indicator goes off, and the station is assigned to the selected preset number.

5Repeat steps 1 to 4 until you store all the stations you want.

To erase a stored preset station

Storing a new station on a used number erases the previously stored one.

To tune in a preset station

From the remote control:

1 Press FM/AM repeatedly to select the	FM/AM
band.

The last received station of the selected band is tuned in.

•Each time you press the button, the band alternates between FM and AM.

2 Press ¢or 4repeatedly until the desired preset station appears on the display.

•¢: Increases the preset number.

•4: Decreases the preset number.

•Press and hold ¢or 4to change the preset number continuously.

On the front panel:

1 Press SOURCE repeatedly until the	SOURCE
desired band appears on the display.

2 Press 7so that “PRESET” appears on the display.

•Each time you press the button, the operation mode of ¢and 4buttons alternates between “PRESET” and “MANUAL.”

PRESET: Select this for using ¢and 4as the buttons to select the preset station.

MANUAL: Select this for using ¢and 4as the buttons to change the frequency manually.

3 Press ¢or 4repeatedly until the desired preset station appears on the display.

•¢: Increases the preset number.

•4: Decreases the preset number.

•Press and hold ¢or 4to change the preset number continuously.

Selecting the FM Reception Mode

When an stereo FM program tuned currently is noisy, you can change the FM reception mode to improve the reception.

From the remote control ONLY:

Press FM MODE.		REPEAT
The	indicator goes off from the display and the
program loses the stereo effect.		FM MODE

To resume the stereo effect, press FM MODE again.

The stereo effect resumes.

Notes:

Be sure to change the FM reception mode to stereo when you change

a station.

35