Dimensional Drawing Specifications, Inches Millimeters

SPECIFICATIONS KF300z

DIMENSIONAL DRAWING

A & E SPECIFICATIONS

(9.56)

7.66

15.40

R 42. 5 CL

9.87 20°

TOP

DIMENSIONS APPLY TO

TOP & BOTTOM

14.75

9.19

3.90

2.12

KF300z

6.37	HANDLE
	ACCESS PANEL

5.91

The 3-way full-range loudspeaker shall incorporate a vented 12-in LF transducer, a 7-in horn-loaded cone MF transducer with Radial Phase Plug™, and a 1.4-in exit / 2.5-in diag- phragm HF compression driver on a constant directivity horn. The MF/HF horn shall have a nominal beamwidth of 90° (h) x 45° (v).

System frequency response shall vary no more than ±3 dB from 100 Hz to 20 kHz measured on axis. In passive mode, the loudspeaker shall produce a sound pressure level (SPL) of 92 dB SPL on axis at 1 meter with a power input of 1 watt,

27.50

FRONT

GRILLE PARTIALLY SHOW

23.23

N (2.13)

8.69

2X 3.62

VIEW A-A

INPUT

CL23.23

5.00

4.00

5.75BACK (2.13)

and shall be capable of producing a peak output of 127 dB SPL on axis at 1 meter. It shall handle 750 watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 ohms.

In bi-amped mode, the LF/MF section shall produce a sound pressure level (SPL) of 92 dB SPL on axis at 1 meter with a

TOP HAT

BOTTOM

7.66

DIMENSIONS APPLY TO

BOTH SIDES

NOTES:

1.SYMBOL INDICATES MOUNTING POINT, 3/8-16

THREADED HOLE (FLY TRACK).

2.SYMBOL INDICATES 3.00 x 1.35 FLY TRACK.

3.SYMBOL INDICATES CENTER OF BALANCE.

4.WEIGHT APPROX. 87 LBS.

5.SHIPPING WEIGHT APPROX. 95 LBS.

power input of 1 watt, and shall be capable of producing a peak output of 127 dB SPL on axis at 1 meter. It shall handle 750 watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 ohms. In addition, the HF section in bi-amped mode shall produce a sound pressure level (SPL) of 101 dB SPL on axis at 1 meter with a power input of 1 watt,

Manufacturing tolerances are +/- 0.13 and +/- 1°

PHYSICAL continued

Dimensions	inches	millimeters
Height	27.5	699
Width (Front)	14.8	375
Width (Rear)	9.5	241
Depth	15.4	391
Trapezoid Angle	10 degrees per side

Weights	pounds	kilograms
Net Weight	87	39.6
Shipping Weight	95	43.2

and shall be capable of producing a peak output of 130 dB SPL on axis at 1 meter. It shall handle 200 watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of exterior grade Baltic birch plywood and shall employ extensive internal bracing. It shall be fin- ished in wear resistant textured black paint. Input connectors shall be 2x Neutrik NL4 Speakon. The system shall include a switch allowing it to be operated in passive or bi-amp pow- ering mode. A total of six 3-position flytracks with integral 3/8"-16 threaded mounting/suspension points (3 each top and bottom) shall be provided. The front of the loudspeaker shall be covered with a powder coated perforated steel grille backed with open cell foam to protect against dust.

The 3-way full-range loudspeaker shall be the EAW model KF300z.

One	Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw. com	www. eaw. com
EAW	products are continually improved. All specifications are therefore subject to change without notice.			KF300z/0002675/2 pp	April 2002	Printed in USA

SPECIFICATIONS KF300z