SPECIFICATIONS
Dimensions: ZBC 402 B/W | ||
Length | 572 | mm |
Width | 502 | mm |
Height | 49 | mm |
Cut Out dimensions | ||
Length | 560 | mm |
Width | 490 | mm |
Voltage | 240 V ~ 50 Hz | |
Total Power | 5.9 kW | |
Rating plates:
Typ084.0 |
| ZBC 402 B | ||
Instr. No. |
|
| Ser.No. | |
|
| |||
ZANUSSI |
|
|
| 240 V ~ 50 Hz |
|
|
|
|
|
|
|
|
| SWISS MADE |
Typ084.0 |
| ZBC 402 W | ||
| ||||
Instr. No. |
|
| Ser.No. | |
|
| |||
ZANUSSI |
|
|
| 240 V ~ 50 Hz |
|
|
|
| SWISS MADE |
2
Prod.No.941591663
5.9kW
Prod.No.941591662
5.9kW
3
1) | Halogen Cooking Zone | ∅ 180 mm | 1800 W |
2) | Cooking Zone | 120/180 mm | 1700 W |
| (doubel circuit) |
|
|
3) | Cooking Zone | ∅ 145 mm | 1200 W |
4) | Halogen Cooking Zone | ∅ 145 mm | 1200 W |
5) | Residual Heat Indicator |
|
|
H H
1 | 5 | 4 |
|
|
|
INSTALLATION
Unpacking
Please examine the appliance for any damage sustained during transportation!
If the appliance is damaged please inform the installer or retailer immediately, before the appliance is
Before using your hob
Clean your ceramic hob thouroughly before its first use. Ceramic hobs are treated and cleaned the same way as glass. When you use the ceramic hob for the first time it can give off a smell for a short time as the manufacturing deposits burn off.
This Zanussi hob may be installed into any kitchen worktop with a depth of 600 mm or more. The worktop must be constructed of material resistant to 100°C.
The cut out in the worktop should be to the dimensions shown in fig.1. Before making the cut out ensure that the edges of the hob, that are to be adjacent to either a side or rear wall, have a minimum distance of 55 mm between the edge of the hob and the wall (fig.5).
Fig.1
4
