MAINTENANCE AND CLEANING
Before carrying out any maintenance and cleaning operations, make sure that the appliance is ISOLA- TED from the electricity supply.
Helpful Tips
•Make sure the bottom of utensils and cooking areas are clean and dry.
•Select the correct heat settings and use saucepans large enough to accommodate the food to eliminate boilovers and splattering.
•If possible, wipe up food spills from adjacent heating areas before using the areas for cooking.
Note
•Use recommended ceramic hob cleaners only.
Cleaning
•To keep exterior trims and control panel in a spotless condition, wipe after each use with a warm soapy cloth.
•Wipe the control knobs with a damp cloth, which has been wrung out in hot, soapy water, then dry tho- roughly.
•Remove any food spills on the hob as soon as possible with a damp cloth.
•Make sure that the hob is cool before applying any cleaning materials.
Ceramic Hobs
Use Cleaner Conditioner daily. As it cleans, it leaves a protective coating of silicone on the smooth surface, which helps to prevent scratches and abrasions in which food particles can collect. It also helps to prevent build up of mineral deposits and will make future
•Apply a dab of cleaner in the centre of each cooking zone to be cleaned (for normal cleaning, start with about 5 ml spoonful of cleaner, apply more if needed). Dampen a cloth and then proceed to clean the hob. To remove more stubborn marks use a slightly dam- pened
•Wipe off this application with another clean damp cloth and dry thoroughly.
•Anysmearingorhazingonthesurfacecanberemoved with a lightly dampened cloth and then be polished with a soft dry cloth.
Note
•If a wet paper towel is used to remove spills from a warm cooking area, be careful to avoid steam burns.
•Do not use a sponge or dishcloth. They will leave a film of water and possible detergent on heating areas, which will turn brown and resemble
How To Deal With Metal Marks
•Metal deposits can be identified as grey/brown marks on the ceramic surface and are usually caused by dragging saucepans with aluminium bases, parti- cularly when new, across the ceramic surface.
•To avoid these marks, protect the surface of the hob with Cleaner Conditioner and lift the saucepans across the heated areas. Ensure that new aluminium based saucepans are well scrubbed on the base to remove any rough edges and take off any deposits left from manufacture.
•The marks are easily removable, providing they are cleaned off straight away using the recommended cleaners, and are not allowed to burn onto the ceramic surface for long periods.
About Discolouration
Discolouration occurs on the surface not IN it.
The cooking surface should be cleaned thoroughly each day to remove all visible spills. Cleaner Conditioner has been specially formulated, use only as much as necessary. If the Ceaner Conditioner is used too gene- rously, a heavy film may be left that will burn on and discolour when the areas are heated. When this occurs, lightly scrub the surface with a dampened
Important notes
•In the event of the hob being scratched, spills will collect and appear as fine lines. These are not fully removable but can be minimised by the daily use of Cleaner Conditioner. These scratches do not affect the cooking peformance.
•Spills from sugar solutions MUST be removed from the hob before the syrup has set, otherwise damage to the glass ceramic surface will occur.
•Do not place aluminium foil dishes on the hot surface as these will cause damage to the hob.
•Hobrite and Corning Cleaner Conditioners are the current recommended cleaner for use on the ceramic hob.
•Cleaner Conditioner is for the ceramic hob only and must NOT be used as general all purpose cleaner.
10
