Apple G3 Minitower manual Turning the Computer On

Page 10

Turning the Computer On

To turn on the computer for the first time, follow these steps:

1Turn on your monitor.

See the information that came with your monitor for the location of the power switch. On newer Apple monitors, the power switch is located on the front.

You may not see the monitor power come on until you turn on the computer in the next step.

By the way: Depending on the type of monitor you have, you may only need to turn it on once. Some monitors turn off automatically when you shut down the computer and turn on automatically when you start up the computer. You turn other monitors on or off separately.

2Turn on your computer by pressing the Power key.

The Power key is marked with a triangle on your keyboard.

You should hear a tone from the computer as it starts up. If you don’t, press the Power key again and hold down the key a little longer.

As the computer starts up, a series of messages appear on the screen.

When the computer starts up, go to the section “What’s Next?” for more instructions.

If the computer does not start up, go to the next section, “Problems Turning Your Computer On?”

10Chapter 1

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Setting Up Your Computer Sometimes built into the monitor Setting Up Your Computer Positioning and Plugging In the ComputerPower cord socket Power cord plug 230Connecting a Monitor To connect the monitor, follow these stepsMonitor power socket Monitor portConnecting the Mouse and the Keyboard to the Computer Plug the mouse cable into the keyboardChapter Optional internal modem port RJ-11 Modem port icon Connecting a ModemModem port icon Modem port Mini DIN-9 Turning the Computer On Problems Turning Your Computer On? What’s Next? Turning the Computer OffUsing Your Macintosh Your Computer’s Components and Front Panel Controls OptionalWorks with high-density and double-sided 3.5 floppy disks Your Computer’s Ports and Connectors Optional AV portsConnects your Macintosh to a printer or LocalTalk network To use your CD-ROM drive, follow these instructions Using the Computer’s Built-in DrivesUsing the CD-ROM Drive Press the Open/Close button next to the CD-ROM driveUsing the Floppy Disk Drive and Optional Zip Drive Connecting Audio EquipmentSound Input and Output Ports Optional Left and Right RCA-Type Audio Ports Stereo miniplugRCA-type plug Left and right RCA-type ports accept this type of connectorConnecting Most Audio Equipment RCA plugsTurn on the computer and the audio equipment Sound Output PortConnecting and Using a Microphone Video connector Connecting Video EquipmentYour Macintosh can work with two major video formats Connecting Video Equipment for Input to the Computer Video plugVideo Input port Audio input ports Left and right Video cableÆS-video Turn on the computer and the VCR or camera˜ Composite Video Input port Audio Connecting Video Equipment for Output From the Computer Video connection for output from the computer Video Audio Connecting a TelevisionOutput port Output ports TV Mirroring icon Resolution icon Composite Video Output port Audio outputBefore You Connect a Scsi Device Connecting External Scsi DevicesScsi icon Scsi port DB-25 Scsi system cable Connecting a Scsi Device External Scsi terminatorConnecting a Printer Printer port icon Printer port Mini DIN-9Connecting an ADB Input Device Connecting a Second MonitorADB port icon ADB port Mini DIN-4 Connecting to a Local Area Network LocalTalk adapter Connecting to a LocalTalk NetworkLocalTalk cable Printer port LocalTalk adapter LocalTalk cable Connecting to a 10Base-T Ethernet Network Ethernet icon 10Base-T Ethernet port RJ-45Ethernet port Wall plate Connecting to Multiple Networks SimultaneouslyConfiguring Your Network Connection 10Base-TSecuring Your Computer Security lock portInstalling PCI Cards, Memory Internal Storage Devices About PCI Expansion CardsVideo memory expansion slot Dram Dimm slots ROM slot Expansion Card Power RequirementsAbout Memory Front of computerImportant Use only Sgram SO-DIMMS Dram ConfigurationsVideo Memory Configurations About Internal Storage OptionsConnecting an Additional ATA Device Pin connectorConnecting an Internal Scsi Device Opening the Computer Back of computer Disconnect the power cord from the back of the computer Remove the cover Press the button and liftUse the handle to open the chassis Installing a PCI Expansion Card Connector Port access cover in place ShieldRemove the screw that holds Disconnect it PCI slotInstalling an Unusually Long PCI Card Installing PCI Cards, Memory, and Internal Storage Devices Memory Installing Dram or Video Memory, next Installing Dram or Video MemoryConnectors Notches Notch ConnectorsSgram SO-DIMM Your DIMM’s shape and components may vary Video memory slotInstalling a Hard Disk or Other Storage Device Bottom chassisRemove the plastic faceplate Carefully lift up the computer so that it sits uprightRaised catch Drive carrier Remove both screwsScsi device Replace the plastic faceplate Sheet metal shield Reinstall both screwsSnap the plastic faceplate back into place Closing the Computer Lock the chassis by rotating the locking levers Replace the computer cover panel What’s Next? Page Health-Related Information About Computer Use Musculoskeletal DiscomfortTo prevent discomfort and eye fatigue Eye FatigueArranging Your Office Shoulders relaxedAvoiding Fatigue Safety InstructionsWhat About Electromagnetic Emissions? Handling Your Computer Equipment Appendix Exposed part From magnets Handling Floppy Disks125 F 52 C 50 F 10 C Do not touch Keep disks away Disk behindHandling Zip Disks Do not touch Keep disks awayDo not expose discs To avoid damage to your discs, keep these points in mindHandling CD-ROM Discs To direct sunlight On discs Do not spill liquidsCleaning the Computer Case Cleaning Your EquipmentPower Supply Cleaning the MonitorLocking and Unlocking the Mouse Here on your mouseRecessed area surrounding ring Setting Up Your Power Macintosh Apple Computer, Inc Contents Appendix Health, Safety, and Maintenance Tips Connecting to Multiple Networks SimultaneouslyInstalling PCI Cards, Memory, and Internal Storage Devices About MemoryCommunications Regulation Information Vi Laser Information

G3 Minitower specifications

The Apple G3 Minitower, released in 1997, marked a significant evolution in Apple’s desktop computer lineup. As part of the G3 series, it was geared towards both professional users and creative enthusiasts, showcasing powerful performance in a compact form factor. This machine was notable for its distinctive design, featuring a sleek, gray plastic enclosure that was both stylish and practical.

At the heart of the G3 Minitower was the innovative G3 processor, which featured a 250 MHz initial speed, and eventually models offered up to 500 MHz. The G3 architecture utilized a combination of RISC (Reduced Instruction Set Computing) technology and sophisticated software optimizations, allowing for increased performance, especially when handling multimedia applications. The system's performance was complemented by the inclusion of the latest technologies at the time, such as PCI expansion slots, enabling users to add graphics cards and other peripherals to enhance functionality.

The standard configuration came with 32 MB of RAM, which was expandable to a maximum of 1 GB. This capacity made it suitable for demanding tasks such as graphic design and video editing, common uses for the target market. Storage options were generous as well, with the G3 Minitower typically coming with a 4 GB hard drive, upgradeable to larger capacities. This component played a vital role in the machine's ability to efficiently store and manage large files associated with multimedia projects.

In terms of connectivity, the G3 Minitower included USB ports, which were becoming increasingly popular in the late 1990s, as well as a built-in modem and Ethernet port for internet connectivity. The Minitower also supported Apple's innovative FireWire technology, allowing for faster data transfer rates, which was especially advantageous for connecting external devices like digital cameras and external hard drives.

The G3 Minitower ran on the Mac OS 8 operating system, giving users access to a user-friendly, robust interface that was ideal for both new and experienced users. With support for a wide range of software applications, it appealed to educators, designers, and developers alike.

Overall, the Apple G3 Minitower represented a significant leap in desktop computing for Apple and firmly established the G3 architecture as a cornerstone of their product offerings for years to come. Its powerful performance, expandability, and design made it a beloved choice among Mac enthusiasts of the era, embodying the spirit of innovation that Apple was known for.
Top Page Image Contents