Apple G3 Minitower manual Connecting to a Local Area Network

Page 37

Connecting to a Local Area Network

Connecting to a local area network extends the features of your Macintosh by giving you access to the services and resources provided on the network. For example, your computer alone lets you store, retrieve, and modify information on floppy disks, hard disks, and CD- ROM discs. On a network, however, you can also store and retrieve information on the hard disks and CD-ROM discs of other computers, access information that other people have stored for you, use electronic mail, share resources such as printers and modems or other network services, and access the Internet, if the network has a link to it. (Access to the Internet over a network may be noticeably faster than access with a modem.)

You can get information about the network you want to connect to from the specialist— referred to as the “network administrator”—who oversees its operation. Before you begin, identify your network administrator.

Your computer can be connected to several kinds of networks, including the following:

mLocalTalk: To connect to a LocalTalk network, you connect a LocalTalk cable to the printer port on your computer.

mEthernet: To connect to a high-speed Ethernet network, you connect an Ethernet cable to the Ethernet port on the back of the computer or to a port provided by a PCI-based Ethernet card that you install in the computer.

mAlternative networks such as 100Base-T, ISDN, or Fiber Distributed Data Interface (FDDI): To connect to any of these networks, you need a PCI card in one of the PCI slots in your computer. For instructions on installing PCI cards, see Chapter 3.

This section describes the process for connecting your computer to LocalTalk and Ethernet networks.

mIf your computer is already connected to a network, see Mac OS Help for information about printing on a networked printer, accessing information on file servers, and sharing files on your computer with other users. Ask your network administrator for information about network software for services such as Internet access and electronic mail.

mIf you want to set up a network at your location, a book on Macintosh networking will help you select and plan a network appropriate for your organization. Many books are available, such as Planning and Managing AppleTalk Networks, an Apple book published by Addison-Wesley and available at computer bookstores.

Using Your Macintosh and Connecting Additional Equipment

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Setting Up Your Computer Sometimes built into the monitor Positioning and Plugging In the Computer Setting Up Your Computer230 Power cord socket Power cord plugTo connect the monitor, follow these steps Connecting a MonitorMonitor port Monitor power socketPlug the mouse cable into the keyboard Connecting the Mouse and the Keyboard to the ComputerChapter Optional internal modem port RJ-11 Modem port icon Connecting a ModemModem port icon Modem port Mini DIN-9 Turning the Computer On Problems Turning Your Computer On? Turning the Computer Off What’s Next?Using Your Macintosh Optional Your Computer’s Components and Front Panel ControlsWorks with high-density and double-sided 3.5 floppy disks Optional AV ports Your Computer’s Ports and ConnectorsConnects your Macintosh to a printer or LocalTalk network Using the CD-ROM Drive Using the Computer’s Built-in DrivesTo use your CD-ROM drive, follow these instructions Press the Open/Close button next to the CD-ROM driveUsing the Floppy Disk Drive and Optional Zip Drive Connecting Audio EquipmentSound Input and Output Ports Stereo miniplug Optional Left and Right RCA-Type Audio PortsConnecting Most Audio Equipment Left and right RCA-type ports accept this type of connectorRCA-type plug RCA plugsSound Output Port Turn on the computer and the audio equipmentConnecting and Using a Microphone Video connector Connecting Video EquipmentYour Macintosh can work with two major video formats Video plug Connecting Video Equipment for Input to the ComputerVideo cable Video Input port Audio input ports Left and rightÆS-video Turn on the computer and the VCR or camera˜ Composite Video Input port Audio Connecting Video Equipment for Output From the Computer Video connection for output from the computer Video Audio Connecting a TelevisionOutput port Output ports Composite Video Output port Audio output TV Mirroring icon Resolution iconBefore You Connect a Scsi Device Connecting External Scsi DevicesScsi icon Scsi port DB-25 Scsi system cable External Scsi terminator Connecting a Scsi DevicePrinter port icon Printer port Mini DIN-9 Connecting a PrinterConnecting an ADB Input Device Connecting a Second MonitorADB port icon ADB port Mini DIN-4 Connecting to a Local Area Network LocalTalk adapter Connecting to a LocalTalk NetworkLocalTalk cable Printer port LocalTalk adapter LocalTalk cable Ethernet icon 10Base-T Ethernet port RJ-45 Connecting to a 10Base-T Ethernet NetworkConfiguring Your Network Connection Connecting to Multiple Networks SimultaneouslyEthernet port Wall plate 10Base-TSecurity lock port Securing Your ComputerAbout PCI Expansion Cards Installing PCI Cards, Memory Internal Storage DevicesAbout Memory Expansion Card Power RequirementsVideo memory expansion slot Dram Dimm slots ROM slot Front of computerVideo Memory Configurations Dram ConfigurationsImportant Use only Sgram SO-DIMMS About Internal Storage OptionsPin connector Connecting an Additional ATA DeviceConnecting an Internal Scsi Device Opening the Computer Back of computer Disconnect the power cord from the back of the computer Press the button and lift Remove the coverUse the handle to open the chassis Installing a PCI Expansion Card Connector Port access cover in place ShieldRemove the screw that holds PCI slot Disconnect itInstalling an Unusually Long PCI Card Installing PCI Cards, Memory, and Internal Storage Devices Installing Dram or Video Memory Memory Installing Dram or Video Memory, nextConnectors Notches Sgram SO-DIMM Your DIMM’s shape and components may vary ConnectorsNotch Video memory slotBottom chassis Installing a Hard Disk or Other Storage DeviceRemove the plastic faceplate Carefully lift up the computer so that it sits uprightRaised catch Remove both screws Drive carrierScsi device Replace the plastic faceplate Sheet metal shield Reinstall both screwsSnap the plastic faceplate back into place Closing the Computer Lock the chassis by rotating the locking levers Replace the computer cover panel What’s Next? Page Musculoskeletal Discomfort Health-Related Information About Computer UseEye Fatigue To prevent discomfort and eye fatigueShoulders relaxed Arranging Your OfficeAvoiding Fatigue Safety InstructionsWhat About Electromagnetic Emissions? Handling Your Computer Equipment Appendix 125 F 52 C 50 F 10 C Do not touch Keep disks away Handling Floppy DisksExposed part From magnets Disk behindDo not touch Keep disks away Handling Zip DisksHandling CD-ROM Discs To avoid damage to your discs, keep these points in mindDo not expose discs To direct sunlight On discs Do not spill liquidsPower Supply Cleaning Your EquipmentCleaning the Computer Case Cleaning the MonitorHere on your mouse Locking and Unlocking the MouseRecessed area surrounding ring Setting Up Your Power Macintosh Apple Computer, Inc Contents Installing PCI Cards, Memory, and Internal Storage Devices Connecting to Multiple Networks SimultaneouslyAppendix Health, Safety, and Maintenance Tips About MemoryCommunications Regulation Information Vi Laser Information

G3 Minitower specifications

The Apple G3 Minitower, released in 1997, marked a significant evolution in Apple’s desktop computer lineup. As part of the G3 series, it was geared towards both professional users and creative enthusiasts, showcasing powerful performance in a compact form factor. This machine was notable for its distinctive design, featuring a sleek, gray plastic enclosure that was both stylish and practical.

At the heart of the G3 Minitower was the innovative G3 processor, which featured a 250 MHz initial speed, and eventually models offered up to 500 MHz. The G3 architecture utilized a combination of RISC (Reduced Instruction Set Computing) technology and sophisticated software optimizations, allowing for increased performance, especially when handling multimedia applications. The system's performance was complemented by the inclusion of the latest technologies at the time, such as PCI expansion slots, enabling users to add graphics cards and other peripherals to enhance functionality.

The standard configuration came with 32 MB of RAM, which was expandable to a maximum of 1 GB. This capacity made it suitable for demanding tasks such as graphic design and video editing, common uses for the target market. Storage options were generous as well, with the G3 Minitower typically coming with a 4 GB hard drive, upgradeable to larger capacities. This component played a vital role in the machine's ability to efficiently store and manage large files associated with multimedia projects.

In terms of connectivity, the G3 Minitower included USB ports, which were becoming increasingly popular in the late 1990s, as well as a built-in modem and Ethernet port for internet connectivity. The Minitower also supported Apple's innovative FireWire technology, allowing for faster data transfer rates, which was especially advantageous for connecting external devices like digital cameras and external hard drives.

The G3 Minitower ran on the Mac OS 8 operating system, giving users access to a user-friendly, robust interface that was ideal for both new and experienced users. With support for a wide range of software applications, it appealed to educators, designers, and developers alike.

Overall, the Apple G3 Minitower represented a significant leap in desktop computing for Apple and firmly established the G3 architecture as a cornerstone of their product offerings for years to come. Its powerful performance, expandability, and design made it a beloved choice among Mac enthusiasts of the era, embodying the spirit of innovation that Apple was known for.
Top Page Image Contents