SATA Interface
Item | Specification |
|
|
SATA controller | Intel B75 |
|
|
Number of SATA channel | SATA X 3(2 * SATA 3Gb/s, 1 * SATA 6Gb/s) |
|
|
Support mode | AHCI/IDE mode option |
|
|
USB Port
Item | Specification |
|
|
Universal HCI | USB 2.0/1.1 or USB 3.0 |
|
|
USB Class | Support legacy keyboard for legacy mode |
|
|
USB Connectors Quantity | USB2.0: |
| • Rear IO : * 4 ports |
| • Internal Header: |
| • *4 ports (2 * USB2.0 H5X2 Header) for B75 |
| • All ports should meet USB IF spec and support 1A current over drive. |
| USB3.0: |
| Internal Header: * 2 ports. |
| • One port support USB fast charging.(Meet USB battery charging spec. ver. |
| 1.2. , Apple charging including ipad.) The other port support standard USB |
| 3.0 downstream port. |
| • Support fast charging in S0, S3, S4, S5, G3 to S5. |
| • All ports should meet USB IF spec and support 2A capability for each port |
| (S0). |
| • reserve design for two USB 3.0 standard down stream ports. |
| • Internal USB 3.0 H10x2 connector, follow the Industrial standard. |
| • H2x1 with Vbus which is required to provide 3A current to front daughter |
| board. |
| • Charging IC is required for fast charger. (ODM proposed) |
| • Rear IO: * 2 ports. |
| • All ports should meet USB IF spec and support 2A capability for each port |
| (S0). |
|
|
10 | Chapter 1 |