Security
Parameter | Description | Option |
|
| |
Supervisor Password | This item indicates whether a supervisor password has been set. If the password has been | |
| installed, Installed displays. If not, Not Installed displays. |
|
|
|
|
User Password | This item allows you to change user password. |
|
|
| |
Change Supervisor | You can select this option and press <Enter> to access the sub menu. You can use the sub | |
Password | menu to change the supervisor password. |
|
|
|
|
Setting a supervisor password
1.Use the up/down arrow keys to select Change Supervisor Password menu then press Enter. A password box will appear.
2.Type a password then press Enter.
The password may consist up to six alphanumeric characters
3.Retype the password to verify the first entry then press Enter again.
4.Press F10.
5.Select Yes to save the new password and close the Setup Utility.
Changing the supervisor password
1.Use the up/down arrow keys to select Change Supervisor Password menu then press Enter.
2.Type the original password then press Enter.
3.Type a new password then press Enter.
4.Retype the password to verify the first entry then press Enter again.
5.Press F10.
6.Select Yes to save the new password and close the Setup Utility.
Removing a supervisor password
1.Use the up/down arrow keys to select Change Supervisor Password menu then press Enter.
2.Enter the current password then press Enter.
3.Press Enter twice without entering anything in the password fields.
22 | Chapter 2 |