Acer X1301 manual PnP/PCI Configurations, Auto Escd, 4096

PnP/PCI Configurations

Parameter	Description	Option
Reset Configuration Data	If enabled, the system is forced to update Extended System	Disabled
	Configuration Data (ESCD) and then is automatically set to the	Enabled
	disabled mode.
	If disabled, the system ESCD will update only when the new
	configuration varies from the last one.
Resources Controlled By	When set to auto ESCD, the system BIOS will detect the system	Auto ESCD
	resources and automatically assign the relative IRQ and DMA channel	Manual
	for each peripheral.
	When set to manual, you have to assign the IRQ and DMA for add-on
	cards.
IRQ Resources	This parameter can be configured if the Resources Controlled By is set	IRQ-5
	to Manual.	IRQ-7, IRQ-9,
	It allows you to assign each system interrupt a type, depending on the	IRQ-10, IRQ-11,
	type of device using the interrupt.	IRQ-14
PCI/VGA Palette Snoop	Enables or disables the system graphic card to allow VGA palette	Disabled
	snooping.	Enabled
Maximum Payload Size	Set the maximum payload size for Transaction packets (TLP).	4096
		128, 256, 512, 1024
		2048

26 Chapter 2