ETI Sound Systems, INC Matrix 200 manual Rain or moisture, Built-in stereo clip limiter

INSIDE THIS INSTRUCTION MANUAL
Important Safety Instructions / Features	2
Product Features / Precautions	3
Amplifier and Mixer Descriptions	4
Set-up & Warranty Information	5-7
Contact Information	8

IMPORTANT SAFETY INFORMATION 1) Read these instructions.

2) Follow all instructions

3) Keep these instructions

4) Heed all warnings

5) Do not use the MATRIX-200 near water. Be extra cautious when moving the system during rain or while transporting the system over wet surfaces as water might splash on to the amplifier. To reduce the risk of fire or electric shock, do not expose the system to rain or moisture.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Use in accordance with manufacturer’s instructions.

	HEED ALL WARNINGS
CAUTION	WARNING: To reduce the risk or fire or elec-
	trical shock do not expose this equipment to
RISK OF ELECTRIC SHOCK
DO NOT OPEN	rain or moisture.

CAUTION: Connect the power cable only after you have made absolutely sure the local mains voltage matches the voltage specified on the device. If you connect to the wrong voltage, you may destroy the electronic components of the MATRIX-200 system.

Stereo Power Amplifier features

8) Do not use near heat sources such as radiators, stoves or other devices that may produce heat.

9) Do not defeat the safety purpose of the polarization or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your

•Output stage with discrete devices, not integrated IC amps

•Output power of 2 x 100w RMS with significant headroom for peaks

•Comprehensive amplifier and speaker protection circuitry to guard against short circuits, DC offsets, over-heating, turn-on thumps, subsonic and supersonic frequencies.

•Built-in stereo clip limiter

•Equalization customized to enhance and optimize speaker system performance

•Output for stereo headphones on rear panel

•Very efficient cooling, utilizing a large heatsink and two direct flow fans

•Power supply with low-noise torodial transformer and a dual voltage (115/230Vac) selector switch

safety. If the provided plug does not fit your outlet, consult an electrician for replacement

5-Channel Mixer features

of the obsolete outlet.

10) Protect the power cord from being walked on or pinched, particularly at the plug and at the point where it exits the MATRIX-200 amplifier.

11) Only use attachments / accessories recommended by B-52 Pro-Audio.

12) Use caution when transporting the system to avoid injury from tip-over.

13) Unplug the MATRIX-200 during lightning storms or when not in use.

14) Refer all servicing to qualified personnel. Servicing is required when the MATRIX-200 has been damaged in any way, such as the

•Four channels with both balanced XLR mic inputs and unbalanced 1/4” jack line level inputs

n 15Vdc phantom power on balanced XLR inputs for condenser microphones

n Independant PAN, TONE and EFFECT LEVEL controls on each channel

•One stereo channel for variety of sources:

n1/4” TRS-style Stereo Phone Jack

n3.5mm Stereo Jack for MP3 / CD players n Dedicated mono 1/4” Jack INSTRUMENT input with frequency response contoured

for acoustical instruments

•Low distortion, low noise circuitry

•PLAYBACK input/output RCA connectors with LEVEL control

•PATCH section to connect optional external processors, external effects and foot switch

•3-band MASTER EQ section

•XLR output for external subwoofer.

•Sub switch not only engages low

frequency output but also removes deep bass from satellites thus increasing dynamic range and lowering overall system distortion

power-cord or plug is damaged, liquid has been spilled into the cabinets, the unit has been exposed to moisture or rain, does not

	Built-in DSP Effects
Loudspeakers

operate normally, or has been dropped.

15) The MATRIX-200 is not intended for outdoor fixed installations or in high moisture areas. Moisture can damage the speakers and can cause corrosion of electrical contacts. Keep speakers out of extended or intense direct sunlight. The speaker surfaces may fade and be damaged by long-term exposure to intense ultra-violent light.

•Dual 6.5” drivers optimized for D’Appolito (mirrored woofers) configuration

•1” exit phenolic tweeter on exponential horn ideally matches dual 6.5” speakers

Complete system

Dimensions:	20” (W) x 32“ (H) x 15” (D)
Weight:	80 (lbs)

• Eight built-in high quality DSP effects

nLevel control to mix processed signal with main signal

nINPUT/MASTER switch to route effects to either Master section or to individual channels

•Sophisticated mixer topology allows the combination of external effect devices to be used in combination with internal DSP

2

Note: Specifications are subject to change without notice