Error Symptom | Action/FRU |
|
|
Diskette drive does not work. | 1.Ensure the diskette drive is not set to None in the |
| Disk Drives of BIOS Setup. |
| 2.Diskette drive power |
| 3.Diskette drive connection/cable |
| 4.Diskette drive |
| 5.Main board |
|
|
Diskette drive read/write error. | 1.Diskette. |
| 2.Diskette drive cable. |
| 3.Diskette drive. |
| 4.Main board |
|
|
Diskette drive LED comes on for more than 2 | 1.Diskette |
minutes when reading data. | 2.Diskette drive connection/cable |
| 3.Diskette drive |
| 4.Main board |
|
|
Diskette drive LED fails to light, and the drive is | 1.Diskette |
unable to access for more than 2 minutes. | 2.Diskette drive power |
| 3.Diskette drive connection/cable |
| 4.Diskette drive |
| 5.Main board |
|
|
Diskette drive test failed. | 1.Diskette |
| 2.Diskette drive |
| 3.Diskette drive cable |
| 4.Main board |
|
|
Hard Disk Drive
NOTE: Ensure hard disk drive is configured correctly in BIOS Setup, cable/jumper are set correctly before diagnosing any hard disk drive problems. (If only one drive is installed, please make sure the drive is connected to master connector or the drive is set to master.)
Hard disk drive test failed. | 1.Enter BIOS Setup and Load default settings. |
| 2.Hard disk drive cable. |
| 3.Hard disk drive. |
| 4. Main board. |
|
|
Hard disk drive cannot format completely. | 1.Enter BIOS Setup and Load default settings. |
| 2.Hard disk drive cable. |
| 3.Hard disk drive. |
| 4.Main board |
|
|
Hard disk drive has write error. | 1.Enter BIOS Setup and Load default settings. |
| 2.Hard disk drive. |
|
|
Hard disk drive LED fails to light, but system | 1.With the system power on, measure the voltage of |
operates normally. | hard disk LED connector. |
| 2.Hard drive LED cable. |
|
|
CD/DVD-ROM Drive
NOTE: Ensure
43 | Chapter 4 |