Acer E700 manual Re-install Bundled Software without CD, Change Password

6.In the Burn image to disc image, select Factory default image and click Next.

7.Follow the instruction s on screen to complete the process.

Re-install Bundled Software without CD

Acer eRecovery stores pre-loaded software internally for easy driver and application re- installation.

1.Boot Windows XP.

2.Press <Alt> + <F10> to open the Acer eRecovery Utility.

3.Enter the password to proceed. The default password is six zeros.

4.In the Acer eRecovery window, select Recovery actions and Next.

5.In the Recovery settings window, select Re-install applications / drivers and click Next.

6.Select the desired driver / application and follow the instructions on screen to re-install.

After the first launch, Acer eRecovery prepared all the needed software and may take few seconds to bring up the software content window.

Change Password

Acer eRecovery and Acer disc-to-disc recovery are protected by a password that can be changed by users. Follow the steps below to change the password in Acer eRecovery.

1.Boot to Window XP.

2.Press <Alt> + <F10> to open the Acer eRecovery utility.

3.Enter the password to proceed. The default password is six zero.

4.In the Acer eRecovery window, select Recovery settings and click Next.

5.In the Recovery settings window, select Password: Change Acer eRecovery password and click Next.

Follow the instructions on screen to complete the process.

Chapter 1 17