TERK Technologies TV38 HDTV owner manual

Page 4

T0437-TV38 Revise-OM.qxp 11/11/03 04:34 AM Page 5

Antenna Assembly (continued)

Antenna Assembly (continued)

TV38

5. Find the larger antenna section and remove the nut and bolt. Slide the narrow boom of the front antenna into the larger section. Tap lightly with a rubber mallet on the end of the small boom aligning the bolt holes. (See figure 4.)

TV38

7. Remove the rear nut and bolt from the larger antenna section. Slide the narrow boom of the rear antenna into the larger section. Tap lightly with a rubber mallet on the end of the small boom, aligning the bolt holes. (See figure 6.)

Re-install the bolt and nut; be sure to tighten it securely.

NOTE: Make sure that the side of the small boom with the phasing lines line up with the nuts on the large boom.

Fig. 4

6.Remove the nuts and washers from the top of the first element holder studs. (See figure 5.) Place the phasing lines from the front section over the studs, and re-attach the washers and hex nuts. Tighten them securely.

Phasing Lines

Fig. 5

5

Re-install the bolt and nut; be sure to tighten it securely.

8. Remove the nut and washer from the top of the last element

holder stud on the top side of the antenna and repeat the process on the last element holder stud on the bottom side of the antenna. (See figure 6.) Place the phasing lines from the rear section over the stud, one on the top side, one on the bottom, and reattach the washers and hex nuts. Tighten them securely.

Fig. 6

9.Lay the boom brace on top of the antenna keeping all the U-bolts on the same side. Locate the bolt hole in the corner reflector and attach the brace with the bolt and nut. Swing the boom brace down towards the rear. Form a "V" with the metal straps. Bolt the “V” to each side of boom. (See figures 7 and 8.)

Fig. 7

Fig. 8

6

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Limited Warranty Performance SpecificationsSafety Precautions Important Safety PrecautionsFollow These Rules and Live See Lightning Protection and GroundingAntenna Assembly TV36TV38 Pointing the Antenna Towards the Broadcast Tower Where To Install Your Antenna Antenna RemovalUniversal Mount For attic installations Types of Support Structures and MountingChimney Mount Mounts on a chimney only Suggested height limitation 10 feet above chimney topSuggested height limitation 10 feet above the rooftop Telescopic Mast not included

TV38 HDTV specifications

TERK Technologies has made a significant mark in the realm of over-the-air television reception with its innovative TV38 HDTV antenna. This cutting-edge device is designed to deliver high-quality HDTV signals, making it a preferred choice for cord-cutters and those seeking a reliable antenna solution for their viewing needs.

One of the standout features of the TV38 is its sleek, modern design that allows it to blend seamlessly into any home environment. The antenna can be easily mounted on a wall, placed on a shelf, or even set up outdoors for optimal reception. This versatility ensures that users can find the perfect spot for it, whether in an urban high-rise or a suburban home.

The TV38 employs advanced technology, including an integrated amplifier, which enhances signal reception and provides a clearer picture quality, even in areas with weak signals. This built-in amplification feature distinguishes the TV38 from many traditional antennas, which often struggle to pick up distant channels. Additionally, the antenna is designed to receive both UHF and VHF signals, allowing users to access a wide array of channels, including local broadcasts, national networks, and digital stations.

Another characteristic of the TERK TV38 is its robust range. The antenna is capable of receiving signals from distances of up to 50 miles, making it suitable for a variety of locations. This extended range is particularly beneficial for users living in rural areas or regions with challenging terrain.

Installation of the TV38 is straightforward, with no special tools required. Most users can have it up and running in less than 30 minutes. The antenna comes with an easy-to-follow instruction manual, ensuring that even those who are not tech-savvy can enjoy hassle-free setup. The included coaxial cable provides ample length, giving users flexibility in positioning the antenna for optimal performance.

In summary, the TERK Technologies TV38 HDTV antenna is an excellent choice for anyone seeking to enhance their television experience without the burden of cable subscriptions. With its stylish design, advanced amplification technology, and impressive range, the TV38 stands out in the crowded market of TV antennas. It offers both functionality and efficiency, making it a must-have for modern viewers aiming to access free broadcast television with ease and clarity.
Top Page Image Contents