Elmo p10 instruction manual Trouble Shooting, Symptoms and Confirmation, 129

Page 65

English

6 TROUBLE SHOOTING

Symptoms and Confirmation

Check the following items. If any abnormality is found, consult the dealer from whom you purchased this product or our nearest branch/office.

Symptom

Possible causes/countermeasures

No image is displayed. • The cable is not correctly connected.

 

• The AC adapter is disconnected from the wall outlet.

 

• The AC adapter is disconnected from the power supply socket of

 

the presenter.

 

• The power is not on. (Blue lamp)

 

• Zoom is set at the TELE side, displaying only the white/black part

 

of the document.

 

• If you turn the power on immediately after turning it off, the unit

 

may not start. Wait for several seconds after turning the power off,

 

and then turn it back on.

 

• The slide switch is not set to the correct image output. In such a

 

case, set the dip switch correctly by referring to “RESOLUTION/

 

VIDEO (Change Resolution Switch)”. P.81

 

 

No image is displayed

• No image is output from the USB during USB Mode (Mass

from the USB.

Storage) or SD Mode. Check whether or not it is set to Mass

 

Storage or SD mode. Switch the USB mode from Mass Storage to

 

Application, referring to “Function Setting Menu”. When using SD

 

mode, change the output image to Camera image. P.91

 

 

The image is out of

• The document (object) is too close to the lens.

focus.

• Some auto focus may be difficult to adjust. Focus on an image

 

manually, referring to “Manual focus”. P.116

 

 

The output image is

• Is the video output system set to PAL? If it is set to PAL, and

disarrayed.

the product is connected to a monitor specially designed for an

 

NTSC system, the video image may not be normally output, but be

 

disarrayed or in black and white. Check if the video output system

 

is set to PAL.

 

• There are cases where the output image may be disarrayed while

 

zooming using the digital zoom. However, this is not a malfunction.

The image is too dark.

• The intensity of the lighting is insufficient. Press the [BRIGHTNESS

 

] button on the front panel or on the remote control to adjust the

 

brightness.

 

 

The image is striped.

• This may be interference fringes between dots of printed matter

 

and TV scanning lines or CMOS pixels. Changing the projection

 

range may mitigate the trouble.

•Vertical stripes may appear on an LCD projector image. Manually adjusting the dot clock at the projector side may mitigate the trouble.

TROUBLE SHOOTING

129

Page 64 Page 66
Image 65
Page 64 Page 66
Contents Mode Demploi Page Instruction Manual All operating and use instructions should be followed Important Safeguards„„ Power Sources „„ Servicing Risk Electric Shock Do not Open Wash hands after handling Before You Use English Contents Trouble Shooting Part Names Part Names and FunctionsT e „„AppearanceName Function List of Functions„„Front operating panel Camera ZoomButton „„Rear panelName Function Change to with USB „„Side panel„„Remote control „„List of functions Power ON/OFFTele WideBrightness Receivable Range Remote Control Reception„„Operations for selecting and deciding icons OSD On-Screen Display„„Adjusting the level bar „„Top menu „„Camera mode OSD menuIcon Name Selection Item Function Icon Name „„Image setting menuEmphasizes the outline of images PAL „„Function setting menuNtsc Sxga Resolution„„OSD top menu „„SD mode OSD menu„„SD menu „„Slide show menu Setting Up Setting UPT e Connecting to the unit with a DVI input terminal equipped Connecting the AC Adapter and Video CableConnecting to the PC with a USB cable GND Connecting the AC adapterPin No 100 Connecting the optional Light Box101 StoringStoring 102 Operation ProcedurePresentation Using Printed Materials, etc „„Turning the illumination lamp ON/OFF 103104 Presentation Using an SD Card Commercially-available„„Displaying the image 105„„Saving the image „„Deleting, locking, and unlocking images 106„„Slide Show 107„„Formatting the SD card 108 109 110 111 Shooting Off the Stage112 Presentation Using Film„„Setting the slide shooting adapter Zoom Various Functions and Operations113 Wide ZOOM-OUT„„Auto Focus AF Focus114 115 „„Normal AF mode„„One-shot AF mode „„Manual focus 116117 Illumination„„Automatic brightness adjustment Adjusting the Brightness„„Manual brightness adjustment 118119 Image Selection„„How to use One-Push „„How to use Auto„„How to use Manual White Balance121 Save/call Settings„„How to save settings 122 „„How to call settings123 „„Highlight settingsHighlight Function „„Highlight operations 124Mask Function „„Mask settings125 „„Mask operationsScroll Function „„Digital zoom settings126 „„Scroll operations„„PIP operations PIP Picture in Picture Function127 „„Connecting the desktop recorder Using a Desktop Recorder Optional„„Operating the desktop recorder by remote control 128Symptoms and Confirmation Trouble ShootingSymptom Possible causes/countermeasures 129SXGA? 130„„General Specifications Specifications„„Main camera Specifications 131Hdtv 132„„Illumination device 133 „„Supplied Accessories NameQuantity TrademarksElmo Europe G.m.b.H HeadquartersWest Coast Branch
Related manuals
Manual 52 pages 63.26 Kb

p10 specifications

The Elmo P10 is a cutting-edge document camera that has become highly regarded in educational and professional environments. Its design and functionality cater to a wide array of presentations, whether in classrooms, meetings, or seminars.

A standout feature of the Elmo P10 is its high-resolution imaging capabilities. The camera boasts a resolution of up to 1080p, which provides crystal-clear images and video output. This clarity is essential for presenting detailed documents, illustrations, or real-time demonstrations without loss of quality. The P10 also features a 16x optical zoom, allowing users to focus on small details while maintaining sharp image quality.

One of the technological highlights of the Elmo P10 is its built-in LED light source. This lighting enhancement ensures that images remain visible and well-lit under various conditions, eliminating shadowing or glare that can distract from the presentation. The camera is also equipped with a versatile tilting arm, enabling users to position the camera at different angles easily. This flexibility is extremely useful for capturing 3D objects or large documents.

In terms of connectivity, the Elmo P10 offers a range of options, including USB and HDMI outputs. This versatility allows it to interface seamlessly with computers, projectors, and interactive whiteboards. The camera is compatible with various operating systems, making it an excellent choice for diverse technological setups.

Another feature that sets the Elmo P10 apart is its built-in image annotation capabilities. Users can draw or highlight directly on the image displayed on the screen, making it an interactive tool that enhances engagement in presentations. The P10 also includes a recording function that enables users to capture their sessions for later review or sharing, a significant advantage for educational settings or training programs.

The Elmo P10 is designed for portability, making it easy to transport between different locations. Its lightweight and compact design ensure that users can set up and dismantle quickly, minimizing downtime during presentations.

In summary, the Elmo P10 combines advanced imaging technology with user-friendly features, making it an invaluable tool for educators and professionals alike. With its high-resolution capabilities, versatile connectivity options, and built-in annotation tools, the Elmo P10 stands as a premier choice for anyone looking to elevate their presentation experience.
Top Page Image Contents