Elmo p10 instruction manual Before You Use

Page 9

English

Before You Use

„„ Be sure to use the power cord applicable to your local power specifications. If the product was sold in Japan, use the power cord or AC adapter sold with the product with 100 VAC and 50 or 60 Hz.

„„ When storing the product, do not leave it under direct sunlight or by heaters. It may become discolored, deformed, or damaged.

„„ Do not place this product in any humid, dusty, salt bearing wind, or vibrating locations.

Only use it under the following environmental conditions:

Temperature:

0°C - 40°C (32°F - 104°F)

Humidity:

30% - 85% (No condensation)

„„ Use a soft, dry cloth for cleaning.

Do not use any volatile solvent such as thinner or benzene.

„„ Do not point the camera lens directly at the sun. This may damage to the device.

„„ Luminescent and Black Spots

There may be some pixels that do not properly operate due to the use of CMOS Area Image Sensors madeup of many pixels.

Though luminescent or black spots may be found on the screen, it is a phenomenon peculiar to the CMOS Area Image Sensors and is not a malfunction.

„„ Follow the guidelines below to prevent the unit from dropping or overturning.

Use the product on a stable base, desk, or table. Do not place the product on an unstable base or slanted surface.

Place or wire the unit to prevent the AC adapter cord or video cable from pulling.

„„ Carry the product by holding the lower part of the main unit in both hands. Never hold the product by the column or the camera head.

„„ Pay careful attention when using (including setting-up and storing) or transferring the product, to prevent the camera head from receiving any shocks.

„„ Do not look directly into the LED light, this can damage your eyes.

„„ Transfer the data from the SD card onto a device such as a PC to save a backup copy. Malfunction of the product or repairs to it may cause the data saved in the SD card to be deleted.

„„ If this product is used for longer than the warranty period, its performance and quality may deteriorate due to the lifetime of its parts. To purchase replacement parts, consult the dealer from whom you purchased this product or our branch/ office near your location.

73

Image 9
Contents Mode Demploi Page Instruction Manual All operating and use instructions should be followed Important Safeguards„„ Power Sources „„ Servicing Risk Electric Shock Do not Open Wash hands after handling Before You Use English Contents Trouble Shooting Part Names Part Names and FunctionsT e „„AppearanceList of Functions „„Front operating panelName Function Camera Zoom„„Rear panel Name Function Change to withButton USB „„Side panel„„Remote control „„List of functions Power ON/OFFTele WideBrightness Receivable Range Remote Control Reception„„Operations for selecting and deciding icons OSD On-Screen Display„„Adjusting the level bar „„Camera mode OSD menu Icon Name Selection Item Function„„Top menu Icon Name „„Image setting menuEmphasizes the outline of images „„Function setting menu NtscPAL Sxga Resolution„„OSD top menu „„SD mode OSD menu„„SD menu „„Slide show menu Setting Up Setting UPT e Connecting the AC Adapter and Video Cable Connecting to the PC with a USB cableConnecting to the unit with a DVI input terminal equipped Connecting the AC adapter Pin NoGND 100 Connecting the optional Light BoxStoring Storing101 Operation Procedure Presentation Using Printed Materials, etc102 „„Turning the illumination lamp ON/OFF 103104 Presentation Using an SD Card Commercially-available105 „„Saving the image„„Displaying the image „„Deleting, locking, and unlocking images 106107 „„Formatting the SD card„„Slide Show 108 109 110 111 Shooting Off the StagePresentation Using Film „„Setting the slide shooting adapter112 Zoom Various Functions and Operations113 Wide ZOOM-OUTFocus 114„„Auto Focus AF „„Normal AF mode „„One-shot AF mode115 „„Manual focus 116117 Illumination„„Automatic brightness adjustment Adjusting the Brightness„„Manual brightness adjustment 118119 Image Selection„„How to use One-Push „„How to use Auto„„How to use Manual White BalanceSave/call Settings „„How to save settings121 122 „„How to call settings„„Highlight settings Highlight Function123 „„Highlight operations 124Mask Function „„Mask settings125 „„Mask operationsScroll Function „„Digital zoom settings126 „„Scroll operationsPIP Picture in Picture Function 127„„PIP operations „„Connecting the desktop recorder Using a Desktop Recorder Optional„„Operating the desktop recorder by remote control 128Symptoms and Confirmation Trouble ShootingSymptom Possible causes/countermeasures 129SXGA? 130„„General Specifications Specifications„„Main camera Specifications 131132 „„Illumination deviceHdtv 133 „„Supplied Accessories NameQuantity TrademarksHeadquarters West Coast BranchElmo Europe G.m.b.H
Related manuals
Manual 52 pages 63.26 Kb

p10 specifications

The Elmo P10 is a cutting-edge document camera that has become highly regarded in educational and professional environments. Its design and functionality cater to a wide array of presentations, whether in classrooms, meetings, or seminars.

A standout feature of the Elmo P10 is its high-resolution imaging capabilities. The camera boasts a resolution of up to 1080p, which provides crystal-clear images and video output. This clarity is essential for presenting detailed documents, illustrations, or real-time demonstrations without loss of quality. The P10 also features a 16x optical zoom, allowing users to focus on small details while maintaining sharp image quality.

One of the technological highlights of the Elmo P10 is its built-in LED light source. This lighting enhancement ensures that images remain visible and well-lit under various conditions, eliminating shadowing or glare that can distract from the presentation. The camera is also equipped with a versatile tilting arm, enabling users to position the camera at different angles easily. This flexibility is extremely useful for capturing 3D objects or large documents.

In terms of connectivity, the Elmo P10 offers a range of options, including USB and HDMI outputs. This versatility allows it to interface seamlessly with computers, projectors, and interactive whiteboards. The camera is compatible with various operating systems, making it an excellent choice for diverse technological setups.

Another feature that sets the Elmo P10 apart is its built-in image annotation capabilities. Users can draw or highlight directly on the image displayed on the screen, making it an interactive tool that enhances engagement in presentations. The P10 also includes a recording function that enables users to capture their sessions for later review or sharing, a significant advantage for educational settings or training programs.

The Elmo P10 is designed for portability, making it easy to transport between different locations. Its lightweight and compact design ensure that users can set up and dismantle quickly, minimizing downtime during presentations.

In summary, the Elmo P10 combines advanced imaging technology with user-friendly features, making it an invaluable tool for educators and professionals alike. With its high-resolution capabilities, versatile connectivity options, and built-in annotation tools, the Elmo P10 stands as a premier choice for anyone looking to elevate their presentation experience.