Metrologic Instruments MLPN 2168 Maintenance, Configuration of the Scanner to the Host System

Page 6

Maintenance

Smudges or dirt that appears on the scanner window can interfere with proper scanning. Therefore, the window will need occasional cleaning.

1.Spray glass cleaner onto lint free, non-abrasive cleaning cloth.

2.Gently wipe the scanner window.

Configuration of the Scanner to the Host System

The scanner has been configured at the time of manufacture based on information supplied at the time of order. If ScanSet™ is being used, refer to the ScanSet documentation for information on how to configure your scanner.

3

Image 6

Contents Metrologic INSTRUMENTS, INC Mlpn September1998Locations USA Corporate Headquarters Europe South AmericaCopyright Table of Contents Unpacking List IntroductionLabels Applications and ProtocolsScanner Version Communication Identifier Protocols Maintenance Configuration of the Scanner to the Host SystemScanner Connections Attaching the Scanner to the Stand and Work Surface Scanning Bar Codes Appendix a Tech 8 Laser Bar Code Scanner Specifications MechanicalOperational EnvironmentalVersion A1 Pin Assignments for the Mil spec Connector Appendix BVersion A15 Pin Assignments for the Mil spec Connector PinfunctionWarranty and Disclaimer Limited Warranty Appendix CDisclaimer Appendix D RemarqueAnmerkung Appendix E PatentsIndex Asic ESDUL/CSA