Metrologic Instruments manual Installing the IS6520-41/MS6520-41TO the Host System

Page 11

INSTALLING THE IS6520-41/MS6520-41TO THE HOST SYSTEM

1.Turn off the host system.

2.Connect the 10-pin RJ45 male connector into the jack on the Cubit™ IS6520/MS6520. You will hear a ‘click’ when the connection is made.

Note: If the Cubit™ IS6520 is receiving power from the host system, skip to step #5. (See caution statement below)

3.Connect the L-shaped plug of the power supply into the power jack on the PowerLink cable.

4.Connect the power supply into an AC outlet. Make sure the AC input requirements of the power supply match the AC outlet.

5.Connect the PowerLink cable to the proper port on the host system.

6.Turn on the host system.

•Œ

‘

•Ž •

Note: Plugging the scanner into a port on the host system does not guarantee that scanned information will be communicated properly to the host system. The scanner is shipped from the factory programmed with default settings. Please refer to the MetroSelect® Programming Manual (MLPN 2407) for instructions on changing the scanner’s configuration. In addition, please check that the scanner and host system are using the same communication protocol.

Caution:

To maintain compliance with applicable standards, all circuits connected to the scanner must meet the requirements for SELV (Safety Extra Low Voltage) according to

EN 60950.

To maintain compliance with standard CSA C22.2 No. 950/UL 1950 and norm EN 60950, the power source should meet applicable performance requirements for a limited power source.

4

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Metrologic INSTRUMENTS, INC Page Locations Iii Table of Contents Table of Contents Printer Note Leave page blank Scanner Interface Introduction∙ Keyboard Wedge Powerlink and Adapter Cable Mlpn Scanner and AccessoriesQuick Start Installing the IS6520-41/MS6520-41TO the Host System Manufacturer’s Recommendation Installing the IS6520-47/MS6520-47 to the PCPage Disconnecting the Powerlink Cables from the Scanner Green & Red LEDs Powerlink CableScanner Parts SpeakerMounting Holes Razzberry Tone Audible IndicatorsThree Beeps On Power Up One BeepFlashing Green and Red and Two Razzberry Tones Failure ModesFlashing Green and One Razzberry Tone Visual Indicators How does Serial Programming work? Programming Modes‘3’ should not be SENT, IT is a Code Type Designation only Abreviated Ascii Table Page Labels MaintenanceMils Optimal LOW and Close Depth of FieldMinimum Bar Code Element Width Optimal High and Normal Depth of Field FAR Depth of Field IS6520/MS6520 Series Troubleshooting Guide Troubleshooting GuideSymptoms Possible Causes Solution Troubleshooting Guide RS-232 only Mechanical Appendix aOperational Environmental ElectricalAppendix B Minimum Symbol Length Symbol Length LockDTS/NIXDORF NCR F NCR S Baud Rate Character RTS/CTS ACK/NA K Keyboard Wedge Pin Function Cable Connector ConfigurationsAppendix C Scanner Pinout ConnectionsAdapter Cable Pin Male DIN Keyboard Wedge Powerlink and Adapter Cable MlpnPowerLink Cable Pin Female DIN Pin Male Mini-DINNo Connect Appendix D Warranty and Disclaimer Limited WarrantyFAX Remarque Appendix EWarnung European StandardFunkstöreigenschaften nach EN Standard EuropeoPatents Appendix F24, 26, 27, 28 IndexIv, 3, 6

MS6520 specifications

The Metrologic Instruments MS6520 is a sophisticated and versatile bar code scanner designed to meet the demands of various industries, including retail, manufacturing, and logistics. Known for its durability and efficiency, the MS6520 combines advanced technology with user-friendly features to provide a seamless scanning experience.

One of the standout features of the MS6520 is its laser scanning technology. Equipped with a high-performance laser, the scanner provides rapid and accurate barcode decoding, even on damaged or poorly printed barcodes. With a scanning speed of up to 100 scans per second, the MS6520 significantly enhances operational efficiency, allowing users to process transactions swiftly.

The MS6520 is designed to handle a wide range of barcodes, including 1D barcodes such as UPC, EAN, and Code 39, as well as some 2D barcodes depending on the model variant. This versatility makes it an ideal solution for businesses that require adaptability in their scanning needs. The scanner also supports various interfaces, including USB, RS-232, and PS/2, ensuring compatibility with a variety of systems and devices.

In terms of ergonomics, the MS6520 is lightweight and comfortable to hold. Its ergonomic design reduces strain during extended use, making it suitable for environments where continuous scanning is required. The scanner's robust construction ensures durability, providing resistance to drops and harsh conditions, which is especially beneficial in busy retail or warehouse settings.

Another key characteristic of the MS6520 is its ability to operate in various environments. The scanner is designed to function effectively in low-light conditions and can cope with challenging environments such as warehouses and outdoor locations. Additionally, the scanner's intuitive design allows for easy one-handed operation, increasing user productivity.

The MS6520 also supports advanced features such as programmable settings, enabling users to customize the scanner according to their specific needs. It includes features such as data formatting and multi-interface support, which can be particularly valuable for business applications requiring specific data outputs.

In summary, the Metrologic Instruments MS6520 is a top-tier barcode scanner that combines high-speed scanning with robust performance and flexible connectivity options. Its ergonomic design, durability, and adaptability make it an excellent choice for businesses looking to streamline their operations and improve efficiency in barcode scanning tasks.
Top Page Image Contents