Precautions

The Canon DR-6080 and DR-9080C are compact desktop document scanners that offer rapid scanning, a large document feeding capacity, and reliable paper feeding. To ensure optimum performance with either unit, please follow the recommendations below.

●Make sure that your documents are within the acceptable scanning sizes. Width: 2.2 – 12 inches (55 – 305 mm)

Length: 2.8 – 17 inches (70 – 432 mm)

Documents up to 39.4 inches (1000 mm) can be scanned in the extra long mode.

Thickness: 0.06 – 0.15 mm (auto feed), 0.05 – 0.3 mm (manual feed)

Weight: 16 – 32 lb. bond (60 – 120 g/m2)

●If there is any wet ink or paste on the document, wait until the ink or paste has thoroughly dried before scanning the document.

●Always clean the scanning rollers after scanning a document that has pencil writing on it.

●Scanning a double-sided document printed on thin paper may result in an image in which elements from the opposite page show through. To avoid this, adjust brightness in the application software.

●If you scan documents with a rough surface, friction between the documents may cause a feeding error. If this happens, select manual feeding and scan the documents one by one.

●When you scan a batch of NCR documents, make sure they are not stuck together.

Refer to Chapter 4.1 of the DR-6080/9080C Instructions manual for further details on acceptable document types and how to place documents on the scanner.

■DOCUMENT TYPES TO AVOID

To avoid paper jams, damage to documents, and scanner malfunction, do not feed the following types of documents. Instead, make a copy of the document and scan the copy.

Wrinkled or creased paper

Curled paper

Torn paper

Paper with clips		Onion skin or
or staples		other thin paper
Carbon-backed paper		Paper with binding
		Paper with binding
		holes
		holes
Coated paper or fax
recording paper