Canon DR-7080C manual How to Use Patch Code Sheets

Page 72

Chapter 4 Using the Scanner

◆How to Use Patch Code Sheets

1 Print the patch code sheet on the following paper size:

●Print [PATCH II (A4)] and [PATCH T (A4)] on A4-size paper.

●Print [PATCH II (LTR)] and [PATCH T (LTR)] on letter size paper.

● Patch code patterns are detected within the enabled range shown below. When

 

 

you make a copy of the patch code sheet, adjust the position of the image so that

Note

it appears in the range in which detection is enabled.

 

 

5 mm

Patch code

5 mm

 

 

 

 

 

 

 

5 mm

(Range in which patch code detection is enabled.)

94 mm

Units: millimeters

●When copying the patch code sheets, use the same size paper and the same density as the original patch code sheet. If the copied sheet is not dense enough, or if it is too dense, the scanner may not be able to recognize it correctly.

●Be careful not to let the patch code sheet get dirty, particularly for the range in which patch code detection is enabled. Do not bend or wrinkle the patch code sheet. This could prevent the scanner from recognizing the sheet.

●When the patch code sheet is being scanned, if it is not dense enough, or if it is too dense, the scanner may not be able to recognize it correctly.

66

Page 71 Page 73
Image 72
Page 71 Page 73
Contents Instructions Model Names Read Carefully Before Opening the Sealed Disk Package Leggere Attentamente Prima DI Aprire LA Confezione Sigillata Instructions International Energy Star Office Equipment Program Introduction ConventionsContents Turning on or OFF the Power Uninstalling the SoftwareDocuments Placing Documents onto the ScannerWhen the Scanner Is Not Recognized When the Scanned Image Is Not Normal Display MessagesTroubleshooting Changing the Stamp Cartridge Daily CleaningSafety Precautions Safe OperationPage Installation Location Power Supply Opening and Closing the FeederCarrying Page Chapter Getting ReadyFeatures of the DR-7080C High durability Advanced Text EnhancementDropout color Stamping optionBefore Getting Started UnpackingRemoving the Transportation Screw Ferrite CorePart Names FeederFlatbed 2Air Vents 3USB Connector 4DIP Switches5SCSI Connectors 6Power Cord ConnectorOperation Panel Job Function Scan to PC Scan to Printer Scan to MailOptional Products Stamp UnitPage Connecting to a Computer Checking Your Operating Environment For USBConnecting to a Computer Scsi ConnectionsScsi Cards Recommended Scsi cardsConnecting the Scsi Cable Attaching the Ferrite CoreSetting the Scsi ID and Terminator Location for attaching ferrite coreTerminator on Terminator OFF Setting the Scsi Transfer Speed USB ConnectionsUSB 2.0 Interface Cards Recommended USB 2.0 interface cardsConnecting a USB Interface Cable Connecting the Power CordTurning on or OFF the Power Turning on the PowerTurn on the scanner Turn on the computerRecognizing the Scanner Turning on or OFF the Power Turning OFF the Power Turn OFF the computer Turn OFF the scannerUsing the Software About the Software ISIS/TWAIN driverCapturePerfect Job Registration ToolInstalling the Software Insert the setup disc into the CD-ROM driveTurn on your computer and start Windows Enter D\*****\setup.exe in the Open field, and then click OK Click the Start button, and then select RunHow to Use the Software How to Display the ISIS/TWAIN Driver Help FileHow to Start CapturePerfect This starts CapturePerfectHow to Start the Job Registration Tool Select Exit from the File menuThis starts Job Registration Tool Uninstalling the Software This section explains how to uninstall the softwareClick the Yes button, and the uninstaller starts Placing Documents onto Scanner Document Feeding and ScanningDocuments Types of DocumentsFeeder Capacity Malfunction during feedingPlacing Documents onto the Scanner Loading a Document into the FeederPlacing Documents onto the Scanner Cause jamming Positioning a Document on the Flatbed Platen Glass Raise the feederSlowly and carefully lower the feeder back down Important backwards Scan Procedure Standard Feeding See pPanel Feeding See p Automatic Feeding See pStandard Feeding Panel Feeding Press the Start keyAutomatic Feeding Load the document into the document feeder tray Scanner detects the documents, and scanning startsUsing the Job Mode for Scanning Press the Job key to enter the Job ModeOther Scanning Techniques Set the Event functionSetting the Event Function Click the Start button, then click Settings Control PanelDouble click Scanners and Cameras This displays the Scanners and Cameras dialog boxClick the OK button Restart Windows Using the Count Only Mode Use the user modes to enter the scanners Count Only ModeUsing Patch Code Sheets Patch Code SheetsTypes of Patch Code Patterns Patch T File aHow to Use Patch Code Sheets Print the patch code sheet on the following paper sizeSet the scanning conditions, and then start scanning Page User Modes User Mode Functions About the User ModesDisplay Contrast Mode Setting Scsi Transfer SpeedHow to Set the User Modes Press the Menu key to display the user mode screensTroubleshooting When the Scanner Is Not Recognized Cause Scanner is not correctly connectedCause Scsi card is not correctly recognized Cause Same Scsi ID is used for other Scsi devices Cause Terminator is not correctly connectedCause Scanner was turned on after the computer Cause Scanner is OFFCause USB 2.0 interface card does not support the scanner Clearing Paper Jams Clearing a Paper JamTroubleshooting Close the feeder guide Close the feeder coverRaise the feeder Paper Jam Causes When the Scanned Image Is Not Normal Scanning glass or rollers in the scanner are dirtyScan conditions are inappropriate Driver or application does not run correctlyError Messages Display MessagesTroubleshooting Scanner Status Messages DisplayTroubleshooting Cannot scan with the feeder CauseRemedy 2 Reload a document into the feeder Page User Maintenance Changing the Stamp Cartridge Grasping the tab inside the scanner, open the feeder guideInsert a new stamp cartridge Close the feeder guideDaily Cleaning Cleaning the Main UnitCleaning the Flatbed Platen Glass and Pressure Board Black Cleaning the Feeder Grasping the tab inside the scanner, open the feeder guide User Maintenance Close the feeder cover Cleaning the Power Plug Specifications 100 AppendixIndex 103 Specifications Specifications for the ScannerOptions ConsumablesExterior Dimensions Cleaning IndexPatch Job Title Record
Related manuals
Manual 4 pages 35.06 Kb

DR-7080C specifications

The Canon DR-7080C is a standout in the world of document scanners, designed for high-volume environments that require efficiency, reliability, and exceptional image quality. With its advanced features and a robust build, the DR-7080C caters to the needs of businesses that prioritize speed and precision in document management.

One of the notable features of the Canon DR-7080C is its remarkable scanning speed. The device can scan up to 70 pages per minute, making it ideal for busy office settings where time is of the essence. With duplex scanning capabilities, it can scan both sides of a document simultaneously, tripling efficiency and reducing the time spent on larger jobs.

The DR-7080C boasts a variety of scanning resolutions, with the capability to produce images at a maximum resolution of 600 x 600 dpi. This ensures that even detailed documents are captured with clarity, whether they are simple text documents or graphics-heavy files. The ability to scan in color also enhances its versatility, making it suitable for different types of documents.

Equipped with Canon's proprietary technologies such as Automatic Deskew, Color Dropout, and Text Enhancement, the DR-7080C optimizes every scanned document. Automatic Deskew automatically straightens images that may have been fed at an angle, while Color Dropout enables users to eliminate specific colors from the scan, enhancing the readability of black-and-white documents. Text Enhancement improves the clarity of scanned text, providing sharper results.

The scanner features a 100-sheet Automatic Document Feeder (ADF), accommodating a variety of document sizes and types. From business cards and legal documents to long receipts and multi-page reports, the DR-7080C can handle them all seamlessly. It supports media sizes ranging from A8 to A3, equipping users with the flexibility needed for diverse scanning tasks.

In terms of connectivity, the Canon DR-7080C is equipped with USB 2.0 and SCSI-III interfaces, allowing for easy integration into existing network systems. This promotes a streamlined workflow, enabling users to and access scanned documents directly from other devices or software applications.

Built for durability and long-term use, the Canon DR-7080C is backed by robust engineering and an intuitive design. Regular maintenance and easy-to-navigate controls make it user-friendly, ensuring that teams can rely on it for daily operations with minimal downtime. Overall, the Canon DR-7080C is a powerful and efficient document scanner that meets the demands of modern businesses, providing high-quality scans coupled with advanced functionality.
Top Page Image Contents