Canon XRD9829REF user manual Control Register Description for XRD9829

XRD9829REF

Control Registers

Function	D7	D6	D5	D4	D3	D2	D1	D0	Power-up
(Register									State
S1/S0)									(Note 1)
Gain
(00)	G5	G4	G3	G2	G1	G0	X	X	000000XX
(MSB)								(LSB)
Offset	O7	O6	O5	O4	O3	O2	O1	O0	01000000
(01)	(MSB)							(LSB)
Mode	X	X	VRT	INPUTDC	DC/AC	CIS/CCD	MUX SEL	MUX SEL	XX000000
(10)			0: INTERNAL	REFERENCE	0: DC	0: CIS
			1: EXTERNAL	(VDCREF)	1: AC	1: CCD
			0:INTERNAL			0 0: VIN0	0 0: VIN0
			(VDCREF=			0 1: VIN1	0 1: VIN1
			AGND)			1 0: VIN2	1 0: VIN2
			1: EXTERNAL			1 1: VIN3	1 1: VIN3
			(VDCREF=VDCEXT)
Mode
& Test
(11)	X	X	X	DIGITAL RESET	TEST3	TEST2	TEST1	X	XXX0000X
				0: NO RESET	0: TEST3	0: TEST2	0: TEST1
				1: RESET	DISABLED	DISABLED	DISABLED
				(REGISTERS ARE	1: OUTPUT	1: OUTPUT	1: VIN1 PIN
				RESETTO	OFBUFFER	OF PGA	TIED TO
				POWER-UP	TIED TO VIN3	TIED TO	INPUT OF
				STATES)	PIN (VIN3 PIN	VIN2 PIN	ADC
				BECOMES	(VIN2 PIN	(PGA OUTPUT
				ANOUTPUT)	BECOMES	DISCONNECTED
					ANOUTPUT)	FROMINPUT
						OFADC)

Table 1. Control Register Description for XRD9829

Note:

1These are the control register settings upon initial power–up. The previous register settings are retained following a logic power-down initiated by the PDB signal.

Rev. 1.00

7