STEP 3 | STEP 4 |
Attach machine rests between pedestals using screws (BB) and flange nuts (CC) as shown. The spacing of the machine rests is determined by your printer size.
CC
If printer is larger than printer stand, use the extender brackets to give you additional length. Place extender brackets on machine rests and fasten with screws (BB) and flange nuts (CC) as shown. Slide extender brackets out to desired size.
STEP 5 | STEP 6 |
Fasten machine rest cups (DD) onto machine rests OR extender brackets (if used) using carriage bolts (EE), washer (FF) and wing nut (GG) as shown. The location of machine rest cups is determined by the printer size. Once everything is attached, place your printer on stand.
Hook wire basket into the slots on the back of the unit.
NOTE: Included in your hardware pack is ground wire. Consult your printer manual for proper procedures.
| EE | GG |
DD | FF | |
| Bretford | |
|
| |
|
| 11000 Seymour Avenue |
|
| Franklin Park, IL 60131 |
|
| TEL: 847.678.2545 |
|
| 800.521.9614 |
|
| FAX: 847.678.0852 |
|
| 800.343.1779 |
Bretford Ltd.
Technology House
7 Lake End Court, Taplow
Bucks SL6 0JQ England
TEL: 01628 603558
FAX: 01628 604923
Part#
www.bretford.com