Getting Started
Connection
Figure 1 shows how to connect the Base Station to a terminal, PC or other host device. Turn off the host before connection and consult the manual for that equipment (if necessary) before proceeding.
Base Station Connection and Routing — Fully insert the Power Cable and Interface (I/F) Cable connectors into their respective ports in the under- side of the Base Station (see Figure 1). Alternatively, you can either loop the cables around the routing clips and back through the routing chan- nel to the front of the Base Station as shown, or the cables can be fed directly out the back of the Base Station via the routing clips.
Optional Power Connection — Plug the AC Adapter into an approved AC wall socket with the cable facing downwards (as shown in Figure 1) to prevent undue strain on the socket.
This Base Station MUST be used with a Datalogic approved power supply. It is not designed to obtain its power off of the terminal (POT). Connection to a host terminal without first connecting the external power supply may result in damage to the terminal.
CAUTION
Figure 1. Connecting the Base Station
Power Cable |
| |
| I/F |
|
| Cable |
|
| Routing |
|
Routing | Channel |
|
|
| |
Clips |
|
|
Bottom of Base Station |
| |
| I/F Cable |
|
|
| Optional |
|
| AC Adapter |
| Base | Power Cable |
| Station | |
|
| |
Quick Reference Guide | 7 |