ST FLTRMx -100 99.2%, THR POS 0 100%, Trips SNC CLR 0

REL TPS (0 - 100%)

Relative Throttle Position is relative throttle position at normal position.

SECOND AIR (AIR_STAT: UPS, DNS or OFF)

Commanded Secondary Air Status is on newer vehicles and actuators to control pollution control.

UPS - UP STREAM module is demanding that secondary air be added at exhaust manifolds

DNS- DOWN STREAM module is demanding secondary air be added at catalytic converter

OFF - Module is demanding no secondary air to be added.

ST FTRMxy (-100 - 99.22%)

Short-term Fuel Trim Bank calculated value represents the short-term relation of fuel metering on a fuel-injected engine.

NOTE: Short-term Fuel Trim calculated value that has a positive percentage is a rich fuel trim and if a negative percentage is present the fuel trim is lean.

ST FLTRMx (-100 - 99.2%)

Short-term Fuel Trim value represents the short-term relation of fuel metering on a fuel-injected engine.

NOTE: Short-term Fuel Trim value with a positive percentage is a rich fuel trim and if a negative percentage is present the fuel trim is lean.

THR POS (0 - 100%)

Absolute Throttle Position is the position the throttle is located. The more the throttle is closed the less percent shown.

THROT CMD (0 - 100%)

Commanded Throttle Actuator Control is the position of the throttle. If throttle is closed the percent will be 0 and if wide open 100%.

TRIPS SNC CLR (0 - 255)

Number of warm-ups since diagnostic trouble codes cleared. Warm-up is when temperature of coolant rises to at least 22°C (40°F) from engine starting and reaching a minimum temperature of 70°C (160°F). If a disel engine the engine minimum temperature is 60°C (140°F.)

TROUB CODE (00 00 - FF FF)

Trouble Code Parameter will give the diagnostic trouble code that caused a freeze frame capture. This information is helpful in diagnosing the cause of a driveability. If no freeze frame data has been captured this PID will be zero.

VEH SPEED (0 - 255K/h) or (0 - 158mph)

Vehicle Speed shows the speed the vehicle is going.

VPWR (0 - 65.535V)

Control Module Voltage is the power input to the control module.

0002-002-2356

9040 specifications

The Actron 9040 is a highly regarded automotive diagnostic tool designed to provide users with an efficient and reliable means of troubleshooting vehicle problems. Its user-friendly interface makes it suitable for both novice users and experienced technicians, enabling it to effectively cater to a diverse demographic of automobile enthusiasts.

One of the main features of the Actron 9040 is its compatibility with a wide range of vehicles. Supporting both OBDI and OBDII protocols, this scanner can work with vehicles from 1996 onward, making it an invaluable tool for diagnosing issues across many makes and models. Its broad compatibility ensures that users can take full advantage of its diagnostic capabilities.

The device boasts a large, easy-to-read LCD screen that displays diagnostic codes and live data in real time. This functionality allows users to visualize how various sensors and systems are performing while the vehicle is in operation. Additionally, the Actron 9040 reads and clears diagnostic trouble codes (DTCs), which can help to quickly identify issues and reset the “Check Engine” light after repairs have been made.

Advanced features of the Actron 9040 include onboard monitoring of various vehicle systems, such as the engine, transmission, and emissions system. This helps users to pinpoint specific problems and assess the overall health of the vehicle. The tool also includes a built-in code library, providing users with detailed definitions of trouble codes, making the troubleshooting process more intuitive.

The Actron 9040 utilizes easy-to-understand menus and prompts, streamlining the diagnostic process. The device is powered through the vehicle's OBDII port, eliminating the need for batteries or external power sources. This design enhances portability and ensures that users can perform diagnostic checks even in remote locations.

In conclusion, the Actron 9040 combines advanced diagnostic technologies with user-friendly features to create an essential tool for anyone involved in vehicle maintenance. Its multi-vehicle compatibility, real-time data monitoring, and in-depth diagnostic capabilities make it an exceptional choice for both DIY enthusiasts and professional mechanics alike. With the growing complexity of automotive systems, tools like the Actron 9040 are crucial for effective vehicle maintenance and repair.