Clevo M575A manual Removing the Wireless LAN Module, Wireless LAN Module Removal

2.Disassembly

Disassembly

Figure 4

Wireless LAN

Module Removal

a. Remove the screws and the cover.

b. Disconnect the cable and pull the release latches.

c. The WLAN module will pop up.

d. Remove the Wireless LAN module.

Note: Make sure you re- connect the antenna ca- ble to the “Main” socket (Figure 4b).



12. Component	Bay
Cover

10.Wireless LAN Module

• 11 Screws

Removing the Wireless LAN Module

1.Turn off the computer, and turn it over remove the battery (page 2 - 5).

2.Remove screws 1 - 11 and remove the component bay cover 12 .

3.Carefully disconnect cable 13 , then gently pull the two release latches 14 - 15 on the sides of the module socket.

4.The Wireless LAN Module 16 (Figure c) will pop-up, and you can remove it.

a.			d.
1		3
	2		4
11			b.
		12
	10		5
		8

96

7

b.			c.
		14	16	16
	13
		15

2 - 8 Removing the Wireless LAN Module