AlphaServer DS20 Pedestal–Rackmount Windows NT
Step 5a Storage Controllers
Selection of two SCSI ports is mandatory for internal storage, see Step 1c. Charts indicate minimum level of operating system supported.
|
| Maximum # Supported |
Order Number | Description | Windows NT 4.0 SP3 |
|
|
|
4 | ||
| Combo adapter, uses 1 PCI slot. Internal |
|
| two external |
|
|
|
|
VHDCI male to VHDCI male UltraSCSI cable; required for each external |
| |
| UltraSCSI shelf attached to KZPCM. |
|
|
|
|
|
|
|
4 | ||
| pin and |
|
4 | ||
| pin HD connector. |
|
| ||
| UltraSCSI shelf attached to |
|
|
|
|
2 | ||
| includes RAID Array 230/Plus Subsystem software and documentation kit. |
|
| VHDCI female connector. Tape drives are not supported. |
|
|
|
|
2 | ||
| includes RAID Array 230/Plus Subsystem Software and documentation kit. Tape |
|
| drives are not supported. SCSI cable is required for each active port. Requires |
|
|
| |
|
|
|
Same as | 2 | |
|
|
|
Cache battery backup for KZPAC controller |
| |
|
|
|
VHDCI male to VHDCI male UltraSCSI cable; required for each external |
| |
| UltraSCSI StorageWorks shelf attached to KZPAC. Note: Manufacturing may |
|
| substitute |
|
SCSI cable/bulkhead assembly kit with |
| |
| connection of one third port. |
|
SCSI cable/bulkhead assembly kit with two ports for |
| |
| external connection of two third ports. |
|
1.18.2 GB disk drives are not supported on
2.SCSI cable/bulkhead assembly kit supports one third port connection from
3.SCSI cable/bulkhead assembly kit supports two third port connections from
(.5 METER)
2.6Alpha Servers