AlphaServer DS20 Pedestal–Rackmount Windows NT
Step 5b M-series Cabinet Enclosure (continued)
Factory Integration
Ballast Kit
Ballast is added to a cabinet at specific locations for specific configurations to meet safety regulations for installation, operation, and service. It is required in H9A15 cabinets when only one system is installed. Refer to Cabinet Configuration Chart.
Two | |
Shelves supported in | |
UltraSCSI | |
UltraSCSI | |
Rackmount StorageWorks controller shelf with RETMA mounting kit, and NEMA power for | |
| |
| |
180 W power supply | |
Shelves supported in SW8xx and 5xx Cabinets | |
UltraSCSI | |
UltraSCSI | |
UltraSCSI | |
| supply |
Removable Media Devices for External StorageWorks shelves | |
12/24 GB 4 mm DAT narrow SCSI tape drive in StorageWorks carrier | |
600 MB 32X | |
600 MB 32X |
StorageWorks Power Supply
180 W power supply |
Compaq CustomSystems Support
Cabinets containing systems and storage must be assembled by qualified assemblers: Compaq Manufacturing, Compaq CustomSystems Group, or an authorized Compaq Certified Integration Partner.
For custom integration of systems, options, cabinet expansion offerings, and additional Compaq and third party devices, or for other cabinets, doors, and trim kits of a different color, contact Compaq CustomSystems at 1
Step 5d UltraSCSI RAID Array Controller and UltraSCSI RAID Packaged Solutions
UltraSCSI RAID Array Controller
2.8Alpha Servers