Sony PCV-W600G quick start Connecting the Modem Cable, To connect the modem cable using a splitter

Connecting the Modem Cable

Connecting the Modem Cable

Your computer is equipped with a single modem line jack to connect the supplied modem cable to your telephone wall jack. To use your wall jack for your telephone and modem lines, purchase a “1-to-2” jack adapter device (splitter).

To connect the modem cable (using a splitter)

1Unplug your telephone cable from the wall jack.

2Insert the telephone cable into one of the RJ-11 jacks on a splitter device (optional).

3Insert one end of the modem cable (supplied) into the other RJ-11 jack on the splitter device.

4Insert the plug end of the splitter device into the telephone wall jack.

5Plug the modem cable into the modem line jack on the computer.

To connect the modem cable

“1-to-2” jack adapter (splitter)

Your computer has a protective sticker covering the Ethernet port located on the right panel. Connect only 10BASE-T and 100BASE-TX cables to the Ethernet port. Using other cables or a telephone cable may result in an electric current overload that can cause a malfunction, excessive heat, or fire in the port. For help on connecting to a network, see your network administrator.

31