VAIO® Computer Quick Start
Precautions and Procedures
The procedures described below assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment.
Sony recommends that memory upgrades be performed by an authorized Sony Service Center. To find the nearest center or agent, go to: http://www.sony.com/pcsupport.
Be careful when installing a memory module in your computer, and be sure to observe the proper safety precautions listed below. Mistakes that occur when installing or removing a memory module may cause a malfunction.
❑Disconnect the system from its power source and from any telecommunications links, networks, or modems before you open the system or follow any of the procedures described below. Failure to do so may result in personal injury or equipment damage.
❑Electrostatic discharge (ESD) can damage disk drives and other components. Perform the procedures described below only at an ESD workstation. If such a station is not available, do not work in a carpeted area, and do not handle materials that produce or hold static electricity (cellophane wrappers, for example). Ground yourself by maintaining contact with an unpainted metal portion of the chassis while performing the procedure.
❑Do not open the memory module package until you are ready to install the module. The package protects the module from ESD.
❑Use the special protective package to store a memory module and prevent ESD, or wrap the memory module in aluminum foil.
Typical expansion memory configuration
Total System Memory (MB) | On board (MB) | Slot (MB) |
128 | 128 | 0 |
256 | 128 | 128 |
88