Installation

How to Wire the AWS Speakers

In order to achieve the best quality and stereo imaging from your AWS speakers, you must wire the speakers correctly. Wiring can be quickly and easily achieved, but be aware and cautious of your work, wiring incorrectly can result in poor sound stage and bass reproduction. 18-gauge (or heavier) speaker cables are recommended for lengths ranging from 25 feet and up. Prep your cable for installation: strip the ends 1/2” (12mm) to expose wire, and tightly twist the ends. For installations that are run on or through a building, use the correct weather proofed wire that complies with local codes.

WARNING L

Prevent electrical shock, by switching off the amplifier or receiver when making connections to the speaker. When making all connections, be sure to connect the + (positive) on the speaker to the + (positive) on the amplifier, and the - (negative) on the speaker to the - (negative) on the amplifier.

-(negative)

+(positive)

Connecting to an Amplifier or Receiver

1)Connect the speaker terminals to the amplifier speaker outputs.

2)When making all connections, be sure to connect +(positive) to +(positive) and - (negative) to -(negative).

-	+	+	-
Amplifier / Receiver

Verify That You Correctly Connected Your Speakers

IMPORTANT: Speaker wire is

usually marked or textured differently to distinguish between positive and negative.

Using the gold-plated binding posts: you can easily connect banana-plugs, spade-plugs and bare wire. Insert the wire into the hole tighten securely (do not let bare wire hang out side of hole).

It is important that your speakers are hooked up with alike polarity or “in-phase”. Use this easy test to determine if you have connected your speakers correctly. Place speakers face-to-face, as close together as possible. Set your amplifier to mono and begin listening to music, reverse the connections on one of the speakers. You should hear distinguishable change in sound. The speaker that plays louder and deeper is the one that is connected correctly.

www.earthquakesound.com

AWS-502 specifications

The Earthquake Sound AWS-502 is a powerhouse in the world of subwoofers, designed to deliver deep, accurate bass for music enthusiasts and home theater aficionados alike. This model showcases a perfect blend of technology and craftsmanship, making it an ideal choice for those seeking to enhance their audio experience.

At the core of the AWS-502 is a robust 12-inch high-excursion woofer, engineered to produce deep, resonant bass. The woofer's special cone design allows for better sound dispersion, ensuring that the bass can fill larger rooms without distortion. With a peak power handling of 500 watts and an RMS power rating of 250 watts, the AWS-502 can deliver the thunderous low frequencies that movie soundtracks and music genres like hip-hop or electronic need to shine.

One of the standout technologies in the AWS-502 is its integrated amplifier, which enables the subwoofer to deliver clean, powerful performance without the need for an external amp. The amplifier is meticulously designed to optimize the woofer's performance, ensuring that every note played is sharp and impactful. Coupled with a built-in low-pass crossover, users can easily blend the subwoofer with their main speakers, tailoring the sound to their room and personal preferences.

The AWS-502 features a front-firing design, allowing for more flexible placement in various room configurations. This design not only enhances the subwoofer's acoustic performance but also makes it easy to integrate into existing audio setups. The adjustable volume control and phase control allow users to fine-tune the subwoofer's output, ensuring seamless integration with other audio components.

Its cabinet is constructed from durable MDF, which minimizes resonance and vibration, providing a clean sound reproduction. Additionally, the sleek and modern finish of the AWS-502 ensures that it complements any decor, making it not just a functional piece of equipment but also a stylish addition to any room.

In summary, the Earthquake Sound AWS-502 subwoofer is a remarkable solution for those who demand high-quality audio performance. With its powerful woofer, integrated amplifier, adjustable controls, and elegant design, the AWS-502 is capable of transforming a simple audio setup into a full-fledged immersive experience, delivering deep, impactful bass that meets the demands of both music lovers and movie buffs. Experience the difference with this top-tier subwoofer that prioritizes both sound quality and user experience.