Connecting the S110 to your system

The graphic in this chapter will provide you with a representation about the subwoofer’s controls.

-the recommended adjustment will give a starting point for a smooth transition between the subwoofer and the panels. To accomplish this, adjust the ‘var low pass crossover’ according to the recommended settings in table 1. Secondly, adjust the ‘high pass filter’ setting according to the recommendation in table 2. The low pass filter’s upper frequency limit is set by the ‘var low pass cross over control’. The high pass filter’s lower frequency limit is set by the ‘high pass filter control (positions 1, 2 and 3)’.

-The ‘mid bass equalizer’ shows 3 positions. Depending on the panel’s position and the room’s acoustic behavior, these settings are usable to smoothen the frequency curve in the cross over region.

-The ‘var bass equalizer’ task is to adjust the subwoofer’s lowest octave. Applications reach from room acoustic compensation to low frequency compensation for movie soundtracks.

-Table 2 will provide some start up settings. There is no tight relationship between the switch positions and the panels of your choice. The ultimate position depends on the panel’s position and the room acoustics.

6. Connecting the S110 to your system

EXPLANATION OF AVAILABLE CONNECTIONS

The line level input (LINE IN) is a standard RCA connector, and is compatible with all consumer electronics. The amplifier will automatically sum the two input signals together to create a mono bass signal. In the event an LFE/SUB-OUT signal is fed to the subwoofer, either line level input may be used. This is also the case when you use separate subwoofers for the left and the right channel.

You need to feed the LINE IN with a stereo signal, if the subwoofer’s special high pass filtering is in use. When you apply two subwoofers and the special high pass filtering is in use, feed the left signal to one subwoofer and the right signal to the other one.

The LINE OUT is specially reserved for the high pass filter feature. It will route the high pass filter’s output signal (the panel’s signal) to the panel’s power amplifier.

The high level input is compatible with all consumer amplifiers. The input impedance of the high level inputs is high enough to not draw significant amounts of power or load down the output of any power amplifier. Small gauge wire may be used to provide the input signal.

When using the subwoofer’s high pass filtering, it’s possible to feed the full range stereo signal into the high level input and route the LINE OUT panel’s signal to the panel’s power amplifier.

FINAL SOUND SOLUTIONS S110 SUBWOOFER MANUAL vs. 1.6 -US- c FSS 2006R

S110 specifications

The Final Sound S110 is an innovative electrostatic loudspeaker that combines cutting-edge technology with an elegant design to deliver an exceptional audio experience. Renowned for its impressive sound quality, the S110 utilizes an advanced electrostatic driver that allows for unmatched clarity and detail in sound reproduction.

One of the standout features of the S110 is its unique diaphragm design. The electrostatic panel, which is significantly thinner than traditional cone drivers, enables the speaker to reproduce high frequencies with remarkable accuracy while minimizing distortion. This characteristic is particularly beneficial for critical listening environments, providing a soundstage that feels both expansive and immersive.

The S110 is also engineered with a proprietary transformer design that enhances the speaker's performance. This transformer ensures that the electrostatic panels receive a consistent power supply, which is crucial for maintaining dynamic range and overall sound fidelity. As a result, users can enjoy music with a true-to-life quality that brings every instrument and vocal performance to the forefront.

Another significant technology incorporated into the Final Sound S110 is its integrated crossover network. Traditional loudspeakers often rely on multiple drivers and crossover points, which can sometimes lead to phase issues and a less cohesive sound. The S110's design simplifies this process by effectively managing frequencies through the electrostatic panel alone, resulting in a more coherent sound across the frequency spectrum.

In terms of aesthetics, the S110 boasts a sleek and minimalist design that fits seamlessly into any modern living space. The build quality is exceptional, with premium materials used throughout the construction. The speaker is available in several finishes, allowing users to choose an option that best suits their décor.

Moreover, the S110 is versatile in terms of placement, as it can be positioned close to walls or corners without significant loss of sound quality. This flexibility ensures that users can enjoy optimal performance no matter the room size or configuration.

Overall, the Final Sound S110 represents a pinnacle of loudspeaker technology. Its combination of precise sound reproduction, innovative engineering, and stylish design makes it a remarkable choice for audiophiles and casual listeners alike, promising a captivating listening experience that transcends traditional audio capabilities. For anyone seeking to elevate their music experience, the S110 is certainly worth considering.