Recommended Crossover Settings | Final Sound S110 manual

•Note that you may need to try more than one location for the subwoofer to reach optimum results.

TABLE 1 Recommended Crossover Settings

Model:	90i	150i	300i	400i	600i	1000i
* Size:	SMALL	SMALL	SMALL	SMALL	SMALL	SMALL
Crossover setting:	150Hz	130Hz	95Hz	65Hz	45Hz	38Hz

PROCEDURE B – QUICK INSTALLATION-

Using the Final Sound S110 special high pass filter facilities.

In this position, the sub’s special high pass filter facilities are active. Basically, the incoming full range signal is split into a low pass filtered signal driving the subwoofer, and a high pass filtered signal driving the left and right front panels. The high pass filter’s crossover frequency is not endlessly variable. It has three pre chosen fixed frequencies, which fall into the usable range for the panels. The ‘Mid Bass Equalizer’ switch on the sub’s back panel, will also give you three positions.

•Position the S110 in the desired location.

•Connect the S110 according to this manual’s instructions.

•Set the sub’s Level control to a minimum and the Phase Switch to 0 degrees (as a starting point).

•Adjust the sub’s Low Pass control (crossover frequency) to the panel’s lowest frequency (see Table 1 or 2).

•Now play some music and gradually turn up the sub’s Level control to a value that matches the main loudspeaker’s level.

•Adjust the Variable Phase control now. This is ONLY necessary if the subwoofer’s position is NOT on the baseline between the loudspeakers or left to the left loudspeaker and right to the right loudspeaker. If the subwoofer is before or behind the baseline, or somewhere else in the room, adjustment of the phase might be necessary. Play some modern music with a strong bass-rhythm to adjust the phase. The Phase control is in the right position, if you’re not aware of a time difference between the mid/high frequencies and the lower frequencies on the listening position. The system is definitely out of phase when the bass frequencies lag behind the rest of the spectrum or there’s a time difference anyway. If it’s not possible to get the right timing, reverse the Phase Switch from ‘0’ to ‘180’ and try again. If this is not helpful, diminish the distance between the subwoofer and the electrostatic panels.

•After adjusting the phase, it might be necessary to re-adjust the balance between the subwoofer and the panels, using the subwoofer’s Level Control.

FINAL SOUND SOLUTIONS S110 SUBWOOFER MANUAL vs. 1.6 -US- c FSS 2006R

S110 specifications

The Final Sound S110 is an innovative electrostatic loudspeaker that combines cutting-edge technology with an elegant design to deliver an exceptional audio experience. Renowned for its impressive sound quality, the S110 utilizes an advanced electrostatic driver that allows for unmatched clarity and detail in sound reproduction.

One of the standout features of the S110 is its unique diaphragm design. The electrostatic panel, which is significantly thinner than traditional cone drivers, enables the speaker to reproduce high frequencies with remarkable accuracy while minimizing distortion. This characteristic is particularly beneficial for critical listening environments, providing a soundstage that feels both expansive and immersive.

The S110 is also engineered with a proprietary transformer design that enhances the speaker's performance. This transformer ensures that the electrostatic panels receive a consistent power supply, which is crucial for maintaining dynamic range and overall sound fidelity. As a result, users can enjoy music with a true-to-life quality that brings every instrument and vocal performance to the forefront.

Another significant technology incorporated into the Final Sound S110 is its integrated crossover network. Traditional loudspeakers often rely on multiple drivers and crossover points, which can sometimes lead to phase issues and a less cohesive sound. The S110's design simplifies this process by effectively managing frequencies through the electrostatic panel alone, resulting in a more coherent sound across the frequency spectrum.

In terms of aesthetics, the S110 boasts a sleek and minimalist design that fits seamlessly into any modern living space. The build quality is exceptional, with premium materials used throughout the construction. The speaker is available in several finishes, allowing users to choose an option that best suits their décor.

Moreover, the S110 is versatile in terms of placement, as it can be positioned close to walls or corners without significant loss of sound quality. This flexibility ensures that users can enjoy optimal performance no matter the room size or configuration.

Overall, the Final Sound S110 represents a pinnacle of loudspeaker technology. Its combination of precise sound reproduction, innovative engineering, and stylish design makes it a remarkable choice for audiophiles and casual listeners alike, promising a captivating listening experience that transcends traditional audio capabilities. For anyone seeking to elevate their music experience, the S110 is certainly worth considering.